Can I Use a TorkLift SuperHitch for a 2014 Ram 3500 on a 2019 Ram 3500

Question

Question:

My 2014 Ram 3500 had the TLD1104 hitch and the weld on the lower tube to cross tube failed due to their design. I did a quick check and confirmed their miss in the moment load due to the super hitch. They replaced it two years ago picked up at their shop with a TLD1108 design. Both use the factory hitch. I now see that the TLD1111-30 is the only hitch that fits a 2019 or 2020 Ram 3500 and now requires removal of the factory hitch. If I had drawings I could figure this out, but I want to reuse the TDL1108 on the new truck and I have no dimensions or specs to confirm fit or design stress. In the good old days we just welded the hitch to the frame. I am concerned the factory hitch will not allow install of the TLD1108 or the new truck frame has a significant change in width. Can you advise if anyone has asked this before or if dimensional wise it just cant fit up? For $909, its a lot to throw away a 2 year old hitch that has performed great. I can see that removing the factory hitch and moving the load directly back to the frame is best to increase the hitch rating, but we are fine with the 20K design for our needs.

asked by: GARY L

1

Helpful Expert Reply:

It looks like there is less than 1/4" difference between the frame width of the 2014 Ram 3500 and the 2019 Ram 3500, but as you mentioned - the B&W # BWHDRH25503 is a fit for both of these vehicles and there are no dimensional differences between the B&W and the TorkLift # TLD1108-30.

The main differences between the TorkLift SuperHitch # TLD1111-30 and the older # TLD1108-30 is that the TLD1111-30 has the stacked 2" and 2-1/2" receivers that require the removal of the factory hitch. This is not required with the # TLD1108-30. Keep in mind that the pre-drilled frame holes on each vehicle may vary by model, so there may be some drilling required when switching your old hitch over to your new truck.

You will be able to use your TorkLift # TLD1108-30 hitch on your 2019 Ram 3500 because of the negligible difference in frame widths on the two different model years of the two trucks (the 2014 is slightly wider than than the 2019).

expert reply by: Erik B

1

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

Hey Tony, I really like the Torklift camper tie downs since they attach directly to the truck frame and provide a very strong and secure tie down location for the camper to attach to. The correct fit for your truck would be the part #TL22PR. Do you…

view full answer...

Answer 5

Hey Barry, the Reese Goose Box part #RP59KR that you referenced has a pin weight capacity of 4,500 lbs. What is the pin weight of your trailer?

view full answer...

Answer 6

Hi Stephanie! Great question and you’re totally right to ask, because most hitches for the 2024 RAV4 do require a bit of bumper trimming. That includes the Oris Detachable Hitch #TS66VR, since it uses a hidden design that needs a hole cut in the…

view full answer...

Answer 7

Hey there Harry, that's a good question, as the difference is the strength of the aluminum vs. polycarbonate Retrax tonneau covers that fit your 2024 Ram 3500 with a 6-1/2 foot bed. The aluminum RetraxPRO MX Hard Tonneau Cover #RT80232 has the…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Can I Use a TorkLift SuperHitch for a 2014 Ram 3500 on a 2019 Ram 3500

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching