Differences Between the Fulton Coupler Hinge Kits FHDPB330301 and FHDPB330303

Question

Question:

What is the difference between FHDPB330301 and FHDPB330303? The specs seem exactly the same on Fultons site. Also, can these be painted to match the trailers color? Thanks!

asked by: AD

0

Expert Reply:

The difference between the two Fulton Swing Away kits you referenced is the material that is used for each of the kits. Other than that they are the same and are designed to fit 3 inch by 3 inch trailer tongues.

The # FHDPB330301 is made of stainless steel which will resist corrosion and the part # FHDPW330300 is made of a raw steel which will corrode much easier.

You could paint either kit if you like. I attached a picture a customer sent to us that shows his painted white to match the trailer.

expert reply by: Jameson C

0

click to enlarge

Answer 1

Thanks for sending pictures! The titanium shims you installed are just fine, but note that the inch of play is absolutely normal per my contact at Cequent Corporation. The Fulton Fold-Away coupler hinge kit you referenced is most likely very similar…

view full answer...

Answer 2

With the Fulton Fold-Away Coupler Hinge Kit for 3" x 4" Tongue - Bolt On - Up to 7,000 lbs #FHDPB340301 installed you will get some up and down movement. Typically this should not exceed about 5 degrees, or 1-1/2" with tongue at the…

view full answer...

Answer 3

I recommend either using the Demco 6K #DM8605101 if you want a standard actuator that fits a 2" hitch ball or the Titan 6K #T4745720 if you like the option of the coupler fitting with either a 1-7/8", 2", or 50 mm hitch ball. Both…

view full answer...

Answer 4

Hey Jesse, so the Demco Cast Head Coupler part #DM37ZR could work on your trailer but worst case scenario you'd need to drill new holes and run new hardware. To see if we have a replacement that would bolt right up we would need to know what…

view full answer...

Answer 5

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 6

There actually is no difference between the two part numbers you referenced. Both of them are the Fulton Coupler #F222000301. The difference in part number is in how they are packaged when we receive them. I attached a review video for this coupler…

view full answer...

Answer 7

That is a tough question to answer as both are excellent manufacturers with their respective pros/cons. In regards to brake actuators, they both make and manufacture them here in the U.S.A. and they both come with a one year warranty. In regards to…

view full answer...

Answer 8

Atwood is no longer in business, which means replacement parts are unfortunately no longer available for your Atwood 61101 surge brake actuator. The best option available if yours is no longer working is to replace the actuator, which you can do with…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Differences Between the Fulton Coupler Hinge Kits FHDPB330301 and FHDPB330303

Featured Help Information

Miscellaneous Media

Continue Researching