U-Bolt Recommendation to fit 4-Inch RV Bumper

Question

Question:

Hi I have a 4inch rear bumper on my RV. I have a spare tire carrier kit bumper mounted tire carrier u bolts like the one you show in your web page. It has 2 u bolts that fit around the bumper. They are 5wide at the top and 5 1/2 inch on both ends. Can you please advise how I can get 2 extra u bolts. I need them to mount another item on the bumper. Thanking you in advance

asked by: Robert G

0

Expert Reply:

The Bumper Mounted Tire Carrier # TR-1 that you referenced is designed to fit 4 inch bumpers, the u-bolts that are designed to fit this carrier are available separately. For that you would want the part # TR-2200. This should work well for you.

expert reply by: Jameson C

0

Answer 1

Hey Tim, of the available RV covers I would recommend the etrailer part #e37VV for your Rockwood Minilite that is 26 foot long for something that is easier to install and provides great protection. How much snow do you guys usually get?

view full answer...

Answer 2

Unfortunately we do not have a video of the HappiJac Truck-Mounted Camper Tie-Downs #LC184089 being installed. The Rear anchors are installed in the end of the bumper. There is no precise mounting location since a variety of bumpers may be installed.…

view full answer...

Answer 3

Hey Jen, thanks for reaching out! The AC world has been shifting a bit this past year because of a new regulation that says all ACs from here on out need to use R32 refrigerant. Because of this, a lot of the older AC units have become obsolete. The…

view full answer...

Answer 4

Hey Yussel, congrats on the new hobby. To replace the bearings on your 2020 Apex Nano 213RDS you'll need the inner bearing item #L68149 and the outer bearing item #L44649. The inner one is bigger so it will be closest to the trailer on the inside…

view full answer...

Answer 5

Good question, Todd! I looked at some pictures we have of the Curt #C37RV hitch installed on a 2024 Hyundai Santa Fe and I think I found a good way to do it. Take a look at the picture I have included and you will see what I am thinking (circled in…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

I do have an option for you but there isn't a spare tire holder designed to be used with the 24x60 etrailer Cargo Carrier for RV Bumper part #e99049. That said, you might be able to use something like the CE Smith Spare Tire Carrier for Trailers…

view full answer...

Answer 8

I can end this debate for you real fast! Trailer tires, which will have an ST in front of the size, should always be inflated to the maximum psi indicated on the tire. Trailer tires usually do not have a recommended and maximum psi indication so I am…

view full answer...

Answer 9

Hey Kelly! It looks like our information shows your tire size is 205/75R14. However, I would double check the tire size on the side of your existing tires to see if that matches. Are you looking for just a tire or a wheel and tire combo? Assuming you…

view full answer...

U-Bolt Recommendation to fit 4-Inch RV Bumper

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching