Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces the U-bolts and nuts used to attach Stromberg Carlson bumper-mounted tire carrier (TR-1) to your bumper.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody. Andy here with etrailer.com. Let's take a brief look at the Stromberg Carlson replacement bumper-mounting hardware. Now, this is going to replace the hardware that you use to mount your Stromberg Carlson bumper-mounted tire carrier to your bumper. And on your screen, I am including the model number of that tire carrier for your reference. And this is going to be used in conjunction with the tire attachment hardware that you see there at the lower-half portion of your screen, identified by the number 2109.
So, this does include everything that you see here on the table before me. You're obviously gonna get these two U-bolts and then, you're going to get four washers. And I've got two on each side of the U-bolt here. And then, four nuts, and again, two on each side. So, I just have the hardware loosely mounted there just so you can see where that's going to go.
And let me retrieve my ruler here just to give you some overall measurements, just to give you the further confidence that this is going to work for you. So, measuring the overall height of the U-bolt, we're sitting right at 5 7/8 inches tall. If you're wondering about that thread length, we're sitting right at 2 1/2 inches long. And then, the thread pitch is 3/8 of an inch by 16 course thread. And then, the overall width of the U-bolt, we're right at five inches.
So, this hardware is exactly like the hardware that you are needing to replace. This is the direct replacement from Stromberg Carlson, so what that means for you is you can trust that it's going to fit right in place of the original. You're not gonna have to worry about compatibility issues, fitment issues, or anything like that. So, if you are needing to replace the hardware used to mount your Stromberg Carlson bumper-mounted tire carrier to your bumper, this is going to be exactly what you need. Well, that's going to wrap up our real brief time today.
I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
Ratings & Reviews
Grumpy
12/18/2020
Great. Mounted on the second trailer now. No rust or corrosion.
Mike
9/17/2016
Great. The u-bolts that I replaced were corroded, and the new ones are still looking good.Thanks.
Kevin
5/3/2018
I really cant give a 1 year review because they were only used, to mount the Jerry-can holders on a rented trailer, for a 1 month trip. But, I can say they worked great for our trip going up through Canada, over the Al-Can Highway into Alaska, on to Denali NP, down to Anchorage, then back to Haines, AK, then took the Ferry Alaskan Marine Hwy to Bellingham, Washington and back home. It was a great trip. I now have them for future use.
Willee
8/14/2021
After a year, everything is still working without incident. GREAT purchase!
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Robert
2/20/2019
Fine