Replacement Bearings, Seals, and Lubricant for a 2004 Marine Master Boat Trailer Hub Service
Updated 11/16/2026 | Published 11/15/2026 >
Products Featured in This Question
Question:
I am about to do maintenance service on my boat trailer. It is a 2004 Marine Master single axle. The serial is 5JUBT21175T012092. What parts or kit do I need to perform hub and bearing service? And, is that an oil bath hub? I have a manufacturers information sheet on the trailer and can email it if you need it. Also, what is the best bearing lubricant? Thank you.
asked by: Roger D
Expert Reply:
Hey Roger! I was able to look up your VIN through Marine Master and found the original hub parts diagram.
Your trailer uses these bearings and races:
Inner Bearing # L68149
Outer Bearing # L44649
Inner Race # L68110 or # L68111
Outer Race # L44610
You'll need two of each for your single-axle trailer.
For lubricant and seals, it depends on your hub setup. If you have the Vault system # DX52UR pictured below, you'll need Dexter Hybrid Oil # DX94TR and Oil Seal # 168255TB if your hub has the 2.56" seal bore.
If you have conventional grease-packed hubs with the older 2.33" seal bore, I recommend marine bearing grease # L54FR and Grease Seal # 168233.
Since your trailer was built around a hub design changeover, just verify your existing seal dimensions and inner race number before ordering. The manufacturer's diagram covers both versions!
Product Page this Question was Asked From
Dexter Vault Hybrid Lubrication System for 2,500-lb to 3,500-lb Axles
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.99 Inch
- 2500 lbs Axle
- 3200 lbs Axle
- 3500 lbs Axle
- Dexter
more information >
Continue Researching
- Q&A: What Bearing Kit and Replacement Parts for My Dexter Vault do I Need for 3,500 Axle Skeeter Boat?
- Q&A: Replacement Torsion Arm Kit w/a 5 on 4-1/2" Lug Nut Pattern for a 3,700 lbs Dexter Versa-Flex
- Q&A: Dexter Vault Hub Service Kit Replacement Kits
- Q&A: Will the Timken Bearing Kit TMK52VR Work w/a Dexter 3,500 lbs Axle?
- Q&A: Do You Have a 2-inch Square Axle Rated for At Least 3,000lbs and Has Idler Hubs?
- Q&A: Reason for Star Design on Dexter Trailer Idler Hub Assembly
- Q&A: Looking for Dexter Vault Oil Bath Bearing Kit for Boat Trailer
- Article: Trailer Wiring Diagrams
- Article: Most Popular Wheel Bearings
- Article: Trailer Brakes Not Working? Troubleshooting Guide
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Wiring Trailer Lights with a 5-Way Plug (It's Easier Than You Think)
- Article: How to Measure a Trailer Axle


