bing tracking image
Q & A Icon

Gooseneck Coupler Height Adjustment After Axle Flip on Enclosed Trailer  

Updated 11/11/2026 | Published 11/08/2026

Question:

Part - DM73KV74 Hello I have a enclosed trailer that I recently did a axle flip on, since doing so, the highest point on my current set up is not high enough to level the trailer out with the truck front of trailer is lower than the back now My current inner tube is about 28 1/2” inches total height with a total of 4 holes. I was looking at your product and was wondering if this was any taller than my current set up? If not, do you all offer a set up that is taller to level out my trailer? I’ve even had some people tell me I can drill out another hole on top of the last one on a new tube but wasn’t sure how safe this would be? I tow pretty heavy with a 40’ enclosed trailer used for a moving company.

0

Expert Reply:

Hey Chris! The Demco eZ-Latch Gooseneck Coupler # DM73KV measures 28-3/4" long and has four adjustment holes, so it isn't going to give you the additional height you're looking for.

I wouldn't recommend drilling another adjustment hole without approval from the manufacturer, especially with the weight you're towing. Adding a hole could compromise the strength of the tube.

Unfortunately, we don't have a longer inner tube I can recommend as a direct replacement. However, depending on your truck's gooseneck hitch, a taller gooseneck ball may give you the additional height you need.

What kind of truck and gooseneck hitch do you have, and approximately how much additional height do you need to get your trailer level?

expert reply by:
0
Robin H
DM73KV
DM73KV
(click to enlarge)

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>