Ball Mount Sway Control Plate Recommendation for a 1-1/4 inch Ball Mount

Question

Question:

Is it more important to match the drawbar size or the class? I have an 1 1/4 drawbar and a class 3 hitch. So... please tell me which hitch plate assembly to choose. I have a 2010 Ford Escape and pop up camper that probably weighs 2700 fully loaded.

asked by: Elaine

0

Expert Reply:

Unless you have something seriously strange a Class III hitch will have a 2 inch opening. That being said if you have a 1-1/4 inch hitch then you need a 1-1/4 inch ball mount plate part # RP26005

I also attached a couple FAQ articles on hitch classifications and sizes for you to check out.

expert reply by: Jameson C

0

Answer 1

Yes, Reese Sway-Control Bracket for 2" Ball Mounts - Class III and IV Item #RP26003 will work 2with a 2-5/16 inch ball provided that the shank of the ball is 1 inch in diameter such as Brophy hitch ball #SC30-C.

view full answer...

Answer 2

Yes, the Reese Sway-Control Bracket #RP26003 that you referenced will work perfectly with your Curt Friction Sway Control Bar #17200. This is actually the exact bracket we recommend using with the Curt Bar since Curt does not have one of their own.…

view full answer...

Answer 3

Hey Jason, so unfortunately we do not carry a sway control bracket that is made for a 2-1/2" hitch. For that the only option would be to use a Weld-On Sway Control Tab #C45822 and have one attached to your current ball mount. I wanted to add…

view full answer...

Answer 4

The Reese Sway Control Bracket, #RP26003, will work with 2-5/16 inch hitch balls as long as the shank of the hitch ball is no larger than 1 inch in diameter. The ball hole of the Reese bracket has a 1 inch diameter. If your current hitch ball has a…

view full answer...

Answer 5

Reese offers two sway control brackets, part #RP26003 that fits over a 2-inch ball mount and part #RP26005 that fits on a 1-1/4-inch Class II ball mount. Neither of these has a 1-1/4-inch diameter hitch ball hole. Part #RP26003 has a 1-inch ball hole…

view full answer...

Answer 6

The sway control bracket you're looking for is #RP26003. This fits a 1 inch diameter hitch ball which you can use #C40007 for a 2-5/16 inch ball. I've linked a video of the bracket being installed.

view full answer...

Answer 7

Hey Cal! The largest shank size for the "slip-on" style of sway control brackets we have is the Reese Sway-Control Bracket #RP26003 for a 1" shank. Since you need something larger you'll need to have the Sway Control Tab #3442…

view full answer...

Answer 8

As long as the shank of your 2-5/16 inch ball is 1 inch it will fit sway control bracket #RP26003. Even if the ball mount you are using has a larger hole you can still use the bracket with a ball that has a 1 inch diameter shank, such as #SC30-C, by…

view full answer...

Answer 9

Yes, the Reese Sway-Control Bracket #RP26003 that you referenced will fit with a 2-5/16 inch hitch ball. The confusion may be that this is designed to fit 2 inch ball mounts. That means ball mounts designed to fit 2 inch hitches. As long as the…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Ball Mount Sway Control Plate Recommendation for a 1-1/4 inch Ball Mount

Featured Help Information

Miscellaneous Media

Continue Researching