Can Sway Control Bracket RP26003 be Used with a 2-5/16 Inch Ball

Question

Question:

Will this work with a 2 5/16 ball?

asked by: Harry

0

Expert Reply:

As long as the shank of your 2-5/16 inch ball is 1 inch it will fit sway control bracket # RP26003. Even if the ball mount you are using has a larger hole you can still use the bracket with a ball that has a 1 inch diameter shank, such as # SC30-C, by using a special bushing, # F-2, which will reduce a 1-1/4 inch ball hole down to a 1 inch.

expert reply by: Michael H

0

Answer 1

Unless you have something seriously strange a Class III hitch will have a 2 inch opening. That being said if you have a 1-1/4 inch hitch then you need a 1-1/4 inch ball mount plate part #RP26005 I also attached a couple FAQ articles on hitch…

view full answer...

Answer 2

Yes, the Reese Sway-Control Bracket #RP26003 that you referenced will work perfectly with your Curt Friction Sway Control Bar #17200. This is actually the exact bracket we recommend using with the Curt Bar since Curt does not have one of their own.…

view full answer...

Answer 3

Reese offers two sway control brackets, part #RP26003 that fits over a 2-inch ball mount and part #RP26005 that fits on a 1-1/4-inch Class II ball mount. Neither of these has a 1-1/4-inch diameter hitch ball hole. Part #RP26003 has a 1-inch ball hole…

view full answer...

Answer 4

Hey Jason, so unfortunately we do not carry a sway control bracket that is made for a 2-1/2" hitch. For that the only option would be to use a Weld-On Sway Control Tab #C45822 and have one attached to your current ball mount. I wanted to add…

view full answer...

Answer 5

Yes, the Reese Sway-Control Bracket #RP26003 that you referenced will fit with a 2-5/16 inch hitch ball. The confusion may be that this is designed to fit 2 inch ball mounts. That means ball mounts designed to fit 2 inch hitches. As long as the…

view full answer...

Answer 6

The sway control bracket you're looking for is #RP26003. This fits a 1 inch diameter hitch ball which you can use #C40007 for a 2-5/16 inch ball. I've linked a video of the bracket being installed.

view full answer...

Answer 7

Yes, Reese Sway-Control Bracket for 2" Ball Mounts - Class III and IV Item #RP26003 will work 2with a 2-5/16 inch ball provided that the shank of the ball is 1 inch in diameter such as Brophy hitch ball #SC30-C.

view full answer...

Answer 8

The Reese Sway Control Bracket, #RP26003, will work with 2-5/16 inch hitch balls as long as the shank of the hitch ball is no larger than 1 inch in diameter. The ball hole of the Reese bracket has a 1 inch diameter. If your current hitch ball has a…

view full answer...

Answer 9

Hey Cal! The largest shank size for the "slip-on" style of sway control brackets we have is the Reese Sway-Control Bracket #RP26003 for a 1" shank. Since you need something larger you'll need to have the Sway Control Tab #3442…

view full answer...

Answer 10

You're already on the right track with everything you looked at. Your 2018 Thor ACE 30.3 has a GVWR of 18,000 lbs so I recommend the following: -Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets for Class A Motorhomes #RM33RR…

view full answer...

Answer 11

Hey Bill, yes the Furrion Vision S+ #FR64AD would be a direct replacement for your current Vision S system. None of it is backwards compatible with the standard Vision S system though.

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Can Sway Control Bracket RP26003 be Used with a 2-5/16 Inch Ball

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching