See what our Experts say about this CURT Accessories and Parts

• Availability of 2" and 2-5/16" Hitch Balls with 1-1/4" Diameter and 3" Long Shank
  Hey Jim, thanks for reaching out! Sounds like you're needing the 2" # 337RB102000 and 2-5/16" # 337RB102516 hitch balls from Buyers Products. If you'll be using both sizes on the same ball mount then I recommend picking up the Convert-A-Ball Kit # 105TB and Bushing # F-2 instead as that will be much easier than having to remove and re-torque the hitch ball each time you need to swap the size.
  view full answer...
• Is there a 1-7/8 Inch Trailer Hitch Ball with a 1-1/4 Inch Shank
  Ball # C48810 is the only 1-7/8 inch diameter ball that also has a 1-1/4 inch shank. Like you said it is made to fit a pintle hitch combo ball mount. What I recommend is a ball with a 1 inch diameter shank like # 19260 and then use bushing # 58184 or # F-2 to use it in your ball mount with the 1-1/4 inch opening.
  view full answer...
• Can Interchangeable Ball Set with 1 Inch Diameter Shank be Used in 1-1/4 Inch Ball Hole
  Yes, you can use the interchangeable ball set # 105TB in a 1-1/4 inch ball hole by using a bushing such as # 58184 or # F-2.
  view full answer...
• Availability of a Trailer Hitch Ball with a 1-1/4 Inch Shank and a 1-7/8 Inch Diameter
  The only 1-7/8 inch ball that we carry with a 1-1/4 inch shank is # C48810, but this is used for a pintle hitch combo hitch. What you can do is use a bushing like # F-2 to go from a 1-1/4 inch ball hole to a 1 inch. You could then use a ball like # 19260.
  view full answer...
• Locking Shock Absorbing Ball Mount With 3 Ball Sizes And a 4 Drop
  I have a option for you as the Convert-A-Ball Interchangeable Ball Set # 902B for the Convert-A-Ball Ball Mount # AMSC4HD you found is only available in a 1" shank with a maximum capacity of 10,000lbs for the 2-5/16" ball. The Curt Rebellion XD Shock Absorbing Adjustable Ball Mount # C83WR is rated for up to 15,000lbs and includes an adjustable 2" and 2-5/16" hitch ball. The ball mount is adjustable up to a 6" drop. You can lock this hitch using the InfiniteRule Lock Set # IR47FR. And...
  view full answer...
• Can Sway Control Bracket RP26003 be Used with a 2-5/16 Inch Ball
  As long as the shank of your 2-5/16 inch ball is 1 inch it will fit sway control bracket # RP26003. Even if the ball mount you are using has a larger hole you can still use the bracket with a ball that has a 1 inch diameter shank, such as # SC30-C, by using a special bushing, # F-2, which will reduce a 1-1/4 inch ball hole down to a 1 inch.
  view full answer...
• Towing Components for 2011 Chevy Corvette Grand Sport
  The Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11380 does come with the mounting hardware needed for installation. This will not fit the dual mode exhaust but will fit all other models. The dual mode is the center not the outside. This will use the Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs # C45521 with hitch pin # F-2 and Hitch ball # A-82. The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 56014 is what...
  view full answer...
• Availability Of a Ball Mount With Friction Sway Control Tab Rated For 10,000LBS
  You do have a couple options but the Curt Ball Mount w/ Sway Control Tab # D320 is not available in a 10K weight capacity. You can use the similar Curt Ball Mount # C45310 rated for 10,000lbs and weld on a Sway Control Tab # C45822. We do also have the Bolt On Bracket # RP26003 but his has a 1" hole versus the 1-1/4" hole on the ball mount. So you will either need to drill the hole larger or use a 2-5/16" Ball # C40007 and Reducer Bushing # F-2. Then you will be able to mount the Friction...
  view full answer...
• Availability of 2-5/16 Hitch Ball with 14K Tow Rating and 1-1/4 Diameter Shank
  The closest thing that we have is the Convert-A-Ball Interchangeable Ball Set # 906b which you could use with the Curt Reducer Bushing for Ball Mounts # F-2. This would only get you to 10,000 lbs max towing capacity though. If you let me know what you are towing and what you're towing it with (including the type of ball mount being used) I can see if we happen to have any alternative options for your application. Otherwise you can use a chrome-plated hitch ball like part # 63836 which...
  view full answer...
• Availability of a Ball Mount that Provides a 6 Inch Rise
  The Draw-Tite Ball Mounts, item # 4283, does not come in a 6 inch rise configuration. At this time we do not have a ball mount with a 6 inch rise available. We do offer two ball mounts with a bit higher rise. The Convert-A-Ball Cushioned Ball Mount for 2 inch Hitches, item # AMSC6HD, has a 6-1/2 inch rise, and the Convert-A-Ball Cushioned Ball Mount, item # AMSC8, has a 6-3/4 inch rise. You could get exactly a 6 inch rise by using the Diversi-Tech Aluminum Ball Mount, item # DTBM5600,...
  view full answer...
• Is There A Pintle Hook That Uses A Ball With A 1" Shank?
  Hi Anthony! I may have an option for you, but the smallest shank size for the ball out of the box (so to say) is going to be the Buyers Products 8 Ton Combination Hitch w/ Mounting Kit, 1-7/8" Hitch Ball # 33710045, which uses a 1-1/8" shank ball (like the # 337RB1780). There are none that we carry that use a ball with a 1" shank. With that said, what I recommend doing is going with something like the Curt Pintle Hook with 1-7/8" Hitch Ball - Bolt On - 6,000 lbs/16,000 lbs # C48180. This...
  view full answer...
• How Much Ball Mount Clearance Is Acceptable For A Hitch Ball?
  An 1/8" of play is acceptable for the hitch ball. Especially with such a light weight hitch rating of the MaxxTow Adjustable-Height Ball Mount # MT70068 at 5,000lbs maximum. We do have bushings that can be used to allow balls to be used that are 1/4" different. Curt Reducer Bushing for Ball Mounts - 1" to 3/4" # C21100 Curt Hitch Ball Bushing - 1-1/4" to 1" # F-2 The 2" Hitch Ball # C40004 has a 1" shank that will fit your ball mount.
  view full answer...
• Bushing for Reducing Hitch Ball Hole from 1-1/4 Inch to 1 Inch
  The bushing that's as close to 11/16 inches that we have is # F-2. This reduces the hole diameter from 1-1/4 inches to 1 inch and is 3/4 inches tall. So it's only 1/16 inches taller than your ball mount's platform.
  view full answer...
  
• Ball Mount with 5-1/4 Inch Rise and 1 Inch Diameter Ball Hole for a 2 Inch Trailer Hitch
  Rise or drop doesn't have to be exact. If you can get it within 1 inch you will be just fine. We have # C24WR which has a 5 inch rise and has a 1 inch diameter ball hole. Or another option is to use # C45336 with bushing # F-2. The bushing acts as a spacer allowing you to use a 1 inch diameter ball shank in a 1-1/4 inch ball hole.
  view full answer...
• Length of Ball Platform for Curt Ball Mount C45446
  On Curt ball mount # C45446 from the center of the ball hole to the nearest vertical part of the ball platform is approximately 3 inches. This ball mount has a 1-1/4 inch ball hole so if you wanted to use a ball with a 1 inch shank you would need to use reducer bushing # F-2.
  view full answer...
  
• Ball Mount for Towing Rental Trailer with 2022 Honda Odyssey
  U-Haul rental trailers typically have a coupler height of 18 inches. When we installed the etrailer # e98855 on a 2022 Honda Odyssey, we found the receiver height to be 13 inches. This would be a height difference of 5 inches. The Draw-Tite # 40332 ball mount offers a 5 inch rise, so it would be a pretty good choice for you. However, I'd go with the Curt # C45336 instead. It's a little less expensive and has plenty of capacity for your needs. For a 2 inch trailer ball, you'd use # A-90....
  view full answer...
• Availability of Corrosion Resistant Hitch Ball Bushing
  We do have a selection of hitch ball bushings available, such as the silver zinc Curt Hitch Ball Bushing # F-2, however these are designed specifically to reduce a particular ball mount hole to a smaller size so that it can accommodate a different sized hitch ball shank. If this is what you are needing, then this product will work great for reducing a 1-1/4 inch ball mount hole to a 1 inch hitch ball hole. The zinc finish will do an excellent job of resisting rust and corrosion. Otherwise,...
  view full answer...
• Why is Curt Hitch Ball # 40038 w/ 12,000 LB GTW Shank Diameter Smaller Than Husky Ball w/ 8,000 LB
  I spoke with my contact at Curt and numerous factors go into the capacity of a hitch ball, including the way the shank is threaded as well as the way the metal was finished. The Curt Hitch Ball, # 40038, has been tested and has a 12,000 lb towing capacity. You definitely want to use a hitch ball that is rated high enough for the weight of your horse trailer and part # 40038 would cover this. Although the Husky ball looks to be sturdier, you mention that it only has an 8,000 lb capacity...
  view full answer...
• Availability of 1-1/4-Inch to 1-Inch Ball Mount Reducer Sleeve for 1-Inch Thick Ball Mount
  For your ball mount that is 1-inch thick you can use Reducer Bushing # RP80106. Like the Curt reducer sleeve # F-2 this item reduces your ball hole from 1-1/4-inches down to 1-inch. The Curt reducer is 3/4-inch tall while the Reese is only 1/2-inch tall.
  view full answer...
• Is Drilling Required to Install a Curt Trailer Hitch # C12051 on a 2009 Saturn Aura
  Yes, you will need to drill two 1/2 inch holes through the frame rail of your 2009 Saturn Aura 2.4L to install this Curt Trailer Hitch # C12051. I attached installation instructions for you to check out also. You may be interested in the following products to complete your towing setup: Class II drawbar # C45522 Pin and Clip # F-4 Hitch ball with 2 inch diameter # 19258 Hitch ball with 1-7/8 inch diameter # 19256 Curt custom fit vehicle wiring # C59236 (installation instructions attached)
  view full answer...
• Can You Use a Hitch Ball With a 1" Shank On The Fastway e2 Weight Distribution Hitch?
  Since the Fastway e2 Weight Distribution # FA94-00-0600 has a 1-1/4" hole for a 2-5/16" Hitch Ball # EQ91-00-6100 you will need a Hitch Ball Bushing # F-2 to use your 2-5/16" Hitch Ball # C40007 with a 1" shank. This will prevent the ball from moving around inside the larger opening on the hitch.
  view full answer...
• Ball Mount with 5 Inch Rise for a Class III Trailer Hitch on a 2015 Nissan Murano
  There are numerous ball mounts that will fit your Class III trailer hitch and that have a 5 inch rise that you can use to tow the trailer level with your 2015 Nissan Murano. Ball mount # C45014 will not work because it does not fit a Class III hitch. It is too small. I recommend # C45336. It has a 5 inch rise and is rated for 10,000 pounds gross trailer weight (limited to the capacity of the hitch or tow vehicle, whichever is lower). This ball mount has a 1-1/4 inch diameter ball hole....
  view full answer...
• Available Hi-Rise 2-Inch Hitch Balls
  We have Brophy hitch ball # CB28Z which is a 2-inch ball with 1-inch of rise. This ball has a 1-1/4-inch diameter shank that is 2-1/2-inches long. We also have Curt 2-inch ball # C40034 which has a 1-inch diameter shank that is 2-1/8-inches long. This can be used with Reducer Bushing # F-2. If you cannot find a hitch ball that matches your requirements you might just change out your ball mount to one with 2-inches more rise or use an adjustable one.
  view full answer...
• Hitch Ball Reducer Sleeve for Ram 2500 Pickup
  It sounds like you need a spacer for your hitch ball. If your ball has a 1-inch shank and the ball mount has a 1-1/4-inch opening, use Reese part # RP80106 or Curt part # F-2.
  view full answer...

Do you have a question about this Accessories and Part?