bing tracking image
Q & A Icon

Are K-Source Towing Mirrors Wide Enough for a Pontoon Boat?  

Updated 10/20/2026 | Published 09/03/2026

Question:

Hi! Im looking at K-Source Universal Towing Mirrors - Clip On - Convex Mirror - Qty 2 Part Number: KS3891-2 which is supposed to fit my 2014 Chevy Silverado 1500. I am towing an 8.5 wide pontoon boat. With the factory mirrors I get a nice view of the front of the boat! Are these wide enough to work with a boat that wide? Thanks! Darryl

0

Expert Reply:

Hey Darryl!

Yes, the K-Source Universal Towing Mirrors # KS3891-2 would be a good option for your 2014 Chevy Silverado 1500 and your 8-1/2' wide pontoon boat. Each towing mirror has a 7-3/4" tall x 5-1/8" wide convex mirror face, so it gives you a much wider field of view than your factory mirrors alone.

I can't guarantee you'll be able to see completely down both sides of an 8-1/2' wide boat since that will also depend on how far your factory mirrors stick out and how the boat sits on the trailer, but these should be a noticeable improvement over the nice view of the front of your pontoon you're getting now.

If you tow the boat regularly and want the most visibility possible, I'd actually lean toward the K-Source Custom Extendable Towing Mirrors # KS62147-48G instead. These replace the factory mirrors and telescope outward, which is going to give you considerably more reach for a wide pontoon boat.

Do your current Silverado mirrors have power adjustment and heat?

expert reply by:
0
Jerry B
Guy profile picture

Guy

9/10/2026

We have a 2016 Tacoma that we used to pull a 8 foot wide camping trailer which is close to 30 feet long. These are considerably better than the stock mirrors. However, I would say they are more in the class of “just better to just good enough” than they are “great or excellent.” Don’t get me wrong – I’m not knocking them and they are far better than just using the stock mirrors but a solution that gives you a wide view would be much better.

Jerry B. profile picture
Etrailer Expert

Jerry B.

9/10/2026

@Guy Thanks for your honest feedback. Based on my experience, I'd definitely agree with you. The # KS3891-2 are good for occasional towing, but I wouldn't consider them the end-all-be-all solution. For any full-timers, I recommend going with the full factory replacement.
James O. profile picture

James O.

9/10/2026

I used those mirrors on a 2017 gmc Acadia. They fit tight and unlike all the other mirrors I’ve used, even ones that are custom fit, they did not vibrate. I was shocked.

Jerry B. profile picture
Etrailer Expert

Jerry B.

9/11/2026

@JamesO That's awesome. I'm glad they exceeded your expectations. What kind of setup do you have with your Acadia?
Darryl A. profile picture

Darryl A.

10/19/2026

Hey Jerry! Thanks for your prompt response. My apologies for my not so prompt reply. Had some medical issues that took this off my list of things to focus on! I measured my current mirrors. The distance between the outside edges of the mirrors is 7' 8". If I figure at least 4" on each side, I would need 9' 2" edge to edge. Each mirror has to make up half the difference, or 9". So the question is, on my truck, does the mirror extend at least 9" beyond the factory mirror? I didn't see any pictures that answered that for my truck, but I may have just missed it. I agree that the mounted one may be a better option, but given that I only do this twice a year, and the can of worms cracking open a 12 year old door would open, I'm inclined to go the temp route! Again, my apologies for not answering for so long! Darryl

Jerry B. profile picture
Etrailer Expert

Jerry B.

10/19/2026

@DarrylA I can totally understand that and I hope everything's going alright now! The mounted distance from your truck to the outside edge of these # KS62147-48G mirrors is 21-3/4". I found that the truck itself is 80" wide, so the total with the two mirrors installed would be 123-1/2, or just over 10' wide. I think it's your best option for sure, but for a more cost effective way, you could go with # KS3891-2, which are 14-1/2" wide and would put you at 109", or right over 9'.
Darryl A. profile picture

Darryl A.

10/19/2026

@JerryB That sounds like it could work. It's close, but even a few inches is way more than I have now! Thanks for your help!
Jerry B. profile picture
Etrailer Expert

Jerry B.

10/20/2026

@DarrylA Happy to assist! If you go with them, I'd love to hear back on if they did or didn't and I could look into other options as well.
See All (5) Replies to Darryl A. ∨

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>