Weight Distribution System And Brake Controller For Towing A 2022 Forest River No Boundaries NB19.2

Question

Question:

Looking to tow a 2022 No Bo 19.2 GVR 4795 with a 2026 Honda passport.

asked by: Peter O

0

Expert Reply:

Hi Peter!

I see you placed an order already, but I still wanted to get you an answer to your question.

And you actually got all the parts I would have recommended! The Redarc Tow-Pro Liberty # RED52VR is one of the best brake controllers on the market and it will handle your 2022 Forest River No Boundaries NB19.2 perfectly! I do want to ask though, do you have a 7-Way on your 2026 Passport already? And if so, is it factory or aftermarket?

The Blue Ox SwayPro Weight Distribution System # BXW0550 will also handle the weight of your camper perfectly! You want your loaded tongue weight to be as close to the middle of the system's capacities as possible, and with this having a tongue weight range of 350 to 550 pounds, it is the best option (I looked it up and your loaded tongue weight will be right around 415 pounds). This is one of the easiest systems to set up and use as well, so you will be very happy with this.

The K-Source Towing Mirrors # KS3990 are also one of my go to options. They fit just about everything and their dual lenses give you a very wide field of view. Plus K-Source mirrors tend to be more stable than other universal style mirrors like this. And they are easy to put on and take off!

Where are you planning on taking your new set up camping for the maiden voyage?

expert reply by: Lazer S

0

Peter O.

9/8/2026

Yes, my car is pre-wired with a 7 pin connector. It has a pigtail connector to plug the brake controller with. Thanks, Peter

Lazer S.

9/8/2026

@PeterO Perfect! That makes the install even easier! ^___^ Have fun out there and let me know if there is anything else I can help with! I will try to be faster next time. ^___^

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 4

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 7

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 8

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 9

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 10

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 11

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 12

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Weight Distribution System And Brake Controller For Towing A 2022 Forest River No Boundaries NB19.2

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching