Replacement Tire and Wheel Size ST205/75D14 for a 2010 Trailmaster Boat Trailer
Updated 07/28/2014 | Published 07/25/2014 >
Products Featured in This Question
Question:
will the Loadstar ST205/75D14 Bias Trailer Tire with 14inch Galvanized Wheel - 5 on 4-1/2 - Load Range C Fit my 2010 Trailmaster Trailer Single Axle with my Tahoe Q4 SS Boat. Trailer says 205/75 14C with a 14x6 rim.
asked by: Robert
Expert Reply:
Yes, tire and wheel combo # AM3S450 will fit your 2010 Trailmaster boat trailer. This is basically an exact match for what you have. The D in the size (ST205/75D14) indicates a bias ply tire. If there was an R instead of a D that would indicate a radial tire. You always want the all the tires on a trailer to be the same construction type, either all bias or all radial. If you did end up needed a radial you would want tire and wheel combo # AM32156.
Product Page this Question was Asked From
Loadstar ST205/75D14 Bias Trailer Tire with 14" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range C
- 205/75-14
- 14 Inch
- M - 81 mph
- 5 on 4-1/2 Inch
- Steel Wheels - Galvanized
- Kenda
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: What is Backspacing of Kenda Karrier KR53 ST205/75R15 Radial Trailer Tire with 15" White Mod Wheel
- Q&A: Galvanized Wheel and Spare Tire for a Boat Trailer
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Do Your Trailer Tires Like AM30150 Come Balanced?
- Article: Trailer Tire Sizing
- Q&A: Replacement 14" Tire for 2014 Starcraft Comet
- Article: Trailer Wiring Diagrams
- Q&A: Choosing Between Kenda Karrier and Kenda Loadstar ST175/80-13 Tire
- Q&A: Recommended Replacement Galvanized Trailer Tire/Wheel Combo for a ST205/75R14 Tire
- Q&A: Difference Between Kenda Karrier K03 and KR35 Trailer Tires
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Brake Controller Installation: Starting from Scratch
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub




