Looking For Rear Cover For Solera Regal Style Idler Head

Question

Question:

I am looking for the REAR cover for the Lippert Solera Regal NON drive head. Our 5th wheel model is Brinkley G3950. I can send pictures too

asked by: Michael M

0

Expert Reply:

Hey Michael, thanks for reaching out. We have just the thing. Here is the cover you are looking for:

- Replacement Back Cover for Solera Power Awnings - Drive Head or Idler Head - Regal Style - Black # LC643921

This is the rear cover for the Solera regal style awnings. It will work for both the idler and drive head sides.

Did something happen to the old cover? Or just normal wear and tear?

expert reply by: Jesse M

0

Replacement Back Cover for Solera Power Awnings - Drive Head or Idler Head - Regal Style - Black
(click to enlarge)

Michael M.

8/11/2026

This is certainly not the back cover we need. I have pics but can't find a way to upload to you. I am looking now for both front and back cover(s) for drive and idler heads for the awnings for our 2026 Brinkley G3950.

Jesse M.

8/12/2026

@MichaelM There is no way to add pictures to the comments on here (yet), but you are welcome to email them to me. My email is [email protected].

Laura C.

8/15/2026

@MichaelM Hi Michael! The information that you need to know, in order to purchase the proper part, is the make and model of the awning you are attempting to repair. I am a 74-year young lady who personally replaced, both the front and back, end covers on our Solera awning. We had an unfortunate encounter with a tree that had not been properly trimmed and had grown into the slow lane of the main artery of our community. I had no idea what awning was installed on our trailer, soI contacted an awning replacement technician, gave him the Make and Model of our travel trailer, an asked him what awning (Make and Model) came on the trailer when it was built. (I also asked the price of replacement.) With that information, I was able to find the exact part that I needed to make the necessary Repair. However, just to be sure I actually called E TRAILER (their telephone number is available on their website). I spoke to a very competent staff member— telling him what happened and what I wanted to Repair. He verified the parts that I needed and they were shipped promptly with payment on my credit card. I followed the directions the E Trailer staff member gave me and finished the repair without issue. Hope this helps!

Michael M.

8/15/2026

@JesseM I sent over an email Wed, Aug 12 with the pics and details. I'll resend again. Thank you

Butch

8/12/2026

These covers do not like cold weather for sure. Lost front and back on forward end and the front half of the rear coming back from Thanksgiving in Alabama 2024. I have since changed rv's and same awning on this one so I covered seams on both sides and top with black gorilla tape and haven't had a problem since. Good luck.

Thomas M.

8/12/2026

I was missing that cover Trailer had it. My only comment is once I ordered I realized I needed bottom cover too. They had whole kit. Look at your cover closely you probably do too.

Thomas M.

8/12/2026

E trailer had it at best price

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

Hi Tony! They are indeed! You are looking for the Replacement Front Cover for Solera Power RV Awnings - Regal Idler Head - Black #LC643923 and Replacement Back Cover for Solera Power Awnings - Drive Head or Idler Head - Regal Style - Black #LC643921.…

view full answer...

Answer 4

Hi Diane! There are two styles that you could have on your 3000 Series Solera Awning. I have a picture linked to show the difference and both options listed as well. If you aren't sure, send your pictures to [email protected] and I can…

view full answer...

Answer 5

Based on the pictures you definitely need the awning support arm #LC281154. I can't tell in that other photo if the pin is bent or damaged, or just barely hanging in there. I'm also not sure if your idler head and roller endcap are ok or not…

view full answer...

Answer 6

Hey Rick, thanks for reaching out. I see you already got your order placed but I wanted to make sure your question was answered. Yes, you can cut the 4-way plug off the #BLU92HR and wire it to a 6-pin or 7-pin plug. People actually do this all the…

view full answer...

Answer 7

Hello Mandy, thanks for writing in. On the Solera powered awning they have to main style covers. One of them is the Regal Style and the other is the Plain style. In order to determine which one you have you will want to look and see if it has the…

view full answer...

Answer 8

Hello Tim, thanks for reaching out. The part number SAE 2 AS2T216 10 comes back as the optronics Low Profile LED RV Tail Light #RVSTLB60. The black part would be called the base of the light and this is only sold as part of the whole tail light…

view full answer...

Answer 9

Hey Ryan. Our narrowest over the range RV convection microwave is the Furrion item #FMCM15SS. It measures 29-15/16" wide x 16-3/8" tall x 15" deep. This microwave has a built in two speed exhaust fan that can be set up to vent air…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Looking For Rear Cover For Solera Regal Style Idler Head

Product Page this Question was Asked From

Continue Researching