Valve Stem Material for Lionshead Steel Spoke Trailer Wheel
Updated 07/29/2026 | Published 07/20/2026
Products Featured in This Question
Question:
Does this wheel LH34ZR come with the valve stem as pictured and if so, is the valve stem metal?
asked by: Tom
Expert Reply:
Thanks for your question Tom. The # LH34ZR comes with a rubber snap-in valve stem that's rated for 80 PSI and fits a 0.453-inch valve stem hole, like # AM20904. If your trailer tires require more than 80 PSI, I'd recommend replacing it with the Metal Valve Stem # AM20906. This is a bolt-in valve stem designed for a 0.453-inch valve stem hole and is rated for pressures over 100 PSI, making it a better choice for higher-pressure trailer tires.
Out of curiosity, what type of trailer are you replacing the wheels on?
Product Page this Question was Asked From
Lionshead Steel Spoke Trailer Wheel - 15" x 6" - 6 on 5-1/2 - Black
- Trailer Tires and Wheels
- Wheel Only
- 15 Inch
- 6 on 5-1/2 Inch
- Steel Wheels - Powder Coat
- Lionshead
more information >
Continue Researching
- Shop: Lionshead Steel Spoke Trailer Wheel - 15" x 6" - 6 on 5-1/2 - Black
- Q&A: Tonneau Cover Recommendation for 2022 Ford F-350 Short Bed Towing 5th Wheel
- Q&A: Do You Need an Offset Ball for a Short Bed F-350 with a Gooseneck Pin Box?
- Q&A: Which Gen-Y Executive Fifth Wheel to Gooseneck Adatper for 1621 with 3,600 lb Pin Weight
- Q&A: Furrion Chill Cube Startup Amp Draw and Generator Compatibility
- Article: Trailer Wiring Diagrams
- Q&A: Will Switching From 5th Wheel Pin Box To Gen Y Nomad Gooseneck Adapter Affect Turn Clearance?
- Q&A: Is The Gen-Y Hitch Nomad Pin Box GY57ND The Same Dimensions As Lippert 1621 Pin Box?
- Q&A: Can I Determine the psi Rating of a Wheel
- Article: Trailer Tire Sizing
- Article: How to Install E-Track in 3 Easy Steps
- Article: How to Raise Your Travel Trailer Height
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Fifth Wheel Trailer Hitch Information and Installation Tips
Tom G.
7/29/2026
I'm putting them on my toy hauler, GVWR 11,000 pounds. I put on steel valve stems because I run a TPMS system with valve cap transmitters. BTW, the TPMS saved us when one of my old made in China rims began to split.