Replacement Shock for Reliable Brand Actuator on a Mastercraft Boat Trailer

Updated 07/14/2014 | Published 07/12/2014

Products Featured in This Question

Replacement Shock for Dexter Model 6 and 10 Brake Actuators

(142)

$59.92

Replacement Shock Absorber for Toledo Brake Actuators

(26)

$216.74

Demco Replacement Shock Dampener for DA66 and DA66L Hydraulic Actuators

(8)

$47.09

Replacement Shock for Demco Hydraulic Trailer Brake Actuators - Models DA10, DA16, DA20, and DA91

(86)

$48.24

Replacement Shock for Titan Model 20 Brake Actuator

(18)

$53.77

Replacement Shock Absorber for Dexter Model 60 Brake Actuators

(117)

$68.94

Question:

I have a Reliable Tongue assembly with the shock damper that is not working. Do you have anything that will cross over?

asked by: Ron

Expert Reply:

One of our replacement shocks might work for your Reliable actuator but we do not carry that particular brand so you would have to go by the measurements.

We have several models including # 1844-2. This particular model fits Toledo brand actuators. When fully closed it measures 6-1/4 inches from center of hole to center of hole and when expanded, it measures approximately 8-1/4 inches from center of hole to center of hole.

Replacement Shock for Titan Model 6 and 10 Brake Actuators # T1242600 measures 6 inches retracted and 8-1/16 inches extended. If you need a replacement for a Titan model 20 use # T0778400.

For a Titan model 60 you would need # T2336200 which is 5 inches when closed and 6-1/4 when open.

Demco shock # DS12426 is 6 inches when closed and 8-1/8 inches when open. And finally we have Demco shock # DM05692 which is 4-11/16 inches when closed and 6-1/8 inches when open.