Will Dexter Heavy-Duty Suspension Kit Fit 2003 Northwood Nash 22H
Updated 05/14/2026 | Published 05/11/2026 >
Question:
Can you tell me if this suspension kit will fit a 2003 Northwood Nash 22H
asked by: Pete S
Expert Reply:
Hey Pete! We don't have a way of knowing if the Dexter Heavy-Duty Suspension Kit # K71-359-00 will fit your 2003 Northwood Nash 22H so you will have to measure. The shackle straps are 2-1/4" long center hole to center hole, and the equalizer is 5-3/4" long on center.
Compare the equalizer dimensions in the attached photo to what you have now. If your measurements match then this kit will work for you. If you have different dimensions let me know in the comments.

Kevin M.
5/14/2026
Measuring your current suspension parts will get you the correct kit. My 05 Carry-On box trailer needed the bores of the spring ends honed with the wire brush to remove the rust buildup before the new bushings would fit properly.
Product Page this Question was Asked From
Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs
- Trailer Suspension Parts
- Suspension Kits
- Boat Trailer
- Snowmobile Trailer
- Double Eye Springs
- Tandem Axle
- Dexter
more information >
Featured Help Information
Instructions
Continue Researching
- Search Results: trailer hubs and drums
- Search Results: trailer brakes
- Search Results: 7k springs
- Search Results: morryde cre3000
- Shop: 6-Leaf Double-Eye Spring for 7,000-lb Trailer Axles - 25-1/4" Long
- Search Results: brakes
- Search Results: trailer leaf springs
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps
- Search Results: spring equalizer
- Q&A: Where Are TRU52FR Leaf Springs Made?
- Shop: MORryde Shock Absorbing Suspension Equalizers for Tandem Axle Trailers w/ 35" Wheelbase - 8K
- Shop: MORryde Rubber Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K
- Q&A: Selecting The Correct Cushioned Equalizer and Wet Bolt Kit For a Grand Design 2800BH
- Shop: Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased
- Shop: Front/Center/Rear Hanger for Double-Eye Springs - 3-1/4" Tall - 9/16" Bolt Hole
- Q&A: How To Measure To Make Sure The MORryde CRE3000 Equalizers Will Fit Your Trailer
- Q&A: What Upgraded Equalizer Can I Use to Replace My 5 5/8" Long Standard Equalizer?
- Q&A: What is Advantage of Never Fail Tandem Axle Suspension Upgrade Hardware Kit Over Other Options
- Q&A: How to Choose Correct Road Armor Equalizer Kit for 2021 Grand Design Travel Trailer
- Q&A: How To Measure Wet Bolts And Suspension Components On Tandem Axle RV
- Video: Curved Equalizer for 1-3/4" Wide Double-Eye Springs Spec Review



Scott
5/13/2026
Worked really well for my 14.4 K tilt trailer. Only problem is the grease zerks did not fit the wet bolts very well and they leaked when grease was applied.