Will Air Lift LoadLifter 7500 XL Fit 2026 Ford F-350 Dually With 48 Gallon Fuel Tank

Question

Question:

Have a 2026 F350 drw 4x4 crew cab with 48 gallon fuel tank. Rear of the tank gets close to the differential. Will the AL83DQ still work? These mount inboard of the leaf springs? Thank you.

asked by: Sven S

0

Expert Reply:

Hey Sven! That 48 gallon fuel tank comes standard on 2026 F-350 configurations with the long bed. Air Lift doesn't have any fitment restrictions, and this kit is specifically made for dually models, so it will fit your truck. Also yes, the # AL83DQ does mount inboard of the leaf springs as seen in the picture below.

What will you be towing or hauling with your truck?

expert reply by: Robin H

0

Air Lift LoadLifter 7500 XL
(click to enlarge)

Sven S.

5/12/2026

Thanks for the reply. I will be ordering them today.

Robin H.

5/12/2026

@SvenS you're welcome, happy to help!

Dan R.

5/21/2026

This is my fourth set of ie bags and the time using Air Lift. I am very impressed with the different settings, ease of install and no leaks. In the past I used another vendor and three out of three installations leaked.

Bret

5/13/2026

Sven, I installed the Air Lift 7500 on my 23 F350 dually with a long bed. I have a Big Foot truck camper and a 26 foot enclosed trailer extended height of 8 feet inside and dual 7000 lb axles. I love the Air Lift system. Installed them myself and have not had a single issue. I installed the compressor inside the cab behind rear seat passenger side. On mine there was the jack and bracket bolted to the floor which I removed and bolted the compressor in it’s place. I live in northern Wisconsin with snow and salt and didn’t like having the compressor on the frame. With the remote or app on my phone I can adjust the pressure anytime. I am sure you will be pleased. Bret

Answer 1

Hi William! We do call out if a kit will fit a dually or not, we just do it a little differently than Air Lift does (see included image). That said, the Air Lift LoadLifter 7500 XL Ultimate Air Helper Springs - Rear Axle #AL89DQ you asked your…

view full answer...

Answer 2

Hey Greg, yes we have confirmed with Firestone that the part #F95FV that you referenced is a confirmed fit for your 2026 Ford F-350 long bed dually. These also will not require you to remove your overload springs either. Are you wanting a compressor…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 10

Hello Matt, I was seeing some mixed information on this as well, so I reached out directly to my contact at Firestone to confirm. The Firestone Ride-Rite Air Bags w/ Easy Mount Compressor - Wireless Control - Single Path - 5,000 lbs #F44XV will fit…

view full answer...

Answer 11

Hey Bob, congrats on a setting up a new camper! Out of all of those options you'll also need to consider daily driving comfort unless that camper is a permanent addition to your truck bed. Listed below are a brief breakdown of each and a…

view full answer...

Answer 12

Hi Bill! Thanks for your pictures, they were extremely helpful! ^___^ The LCI Part #194170 on that tag you found means you have a 1621 pin box. The Gen-Y #GY45SR you were looking at is specifically for the Lippert 1116 and 1716 pin boxes, so you will…

view full answer...

Will Air Lift LoadLifter 7500 XL Fit 2026 Ford F-350 Dually With 48 Gallon Fuel Tank

Product Page this Question was Asked From

Continue Researching