Will The Progressive Dynamics PD4575LICSV Work With Non-Lithium Batteries?

Question

Question:

Is the PD4575LICSV compatible with non-Lithium batteries?

asked by: Matt

0

Expert Reply:

Hi Matt!

The PD4575LICSV Progressive Dynamics Lithium 75A 4500 Series Inteli-Power Converter Section is only designed to be used with lithium iron phosphate batteries. I think that is why this specific part was discontinued mid 2025.

The Progressive Dynamics 4500 Series Inteli-Power Converter - 75 Amp # PD4575K18LS8 now uses the Converter Section for Progressive Dynamics Inteli-Power 4500 Series 75 Amp Power Center # PD4575CSV that can be used with lithium-ion, flooded lead acid, AGM, and gel batteries. I believe this is what you are looking for.

What are you wanting to install this on?

expert reply by: Lazer S

0

Switch For Different Battery Type
(click to enlarge)

Matt

5/11/2026

Thank you for the answer. It is for a 2016 Montana RV.

Lazer S.

5/11/2026

@Matt Cool camper! Have fun out there and let me know if there is anything else I can help with! ^___^

Matt

5/23/2026

You say: PD4575LICSV is a converter section. PD4575CSV is a power center but appears to be a converter section. PD4575K18LS8, uses the converter section of PD4575CSV power center, but appears itself to be a power center that comes with the converter section installed. Two questions please: I'm not clear on what I need to purchase? Was your answer AI generated?

Lazer S.

5/25/2026

@Matt It depends on what you are needing. If you are looking for a whole new power center, then you will want the # PD4575K18LS8. If you only need to upgrade your current power center to handle the new batteries, you would need the # PD4575CSV. And no, I do not use AI for answering questions. I am one of those anti-AI people and use it as little as humanly possible (unless I'm making stupid pictures of things as I'm not artistic at all). Out of curiosity, why do you ask?

T C.

5/12/2026

Yes it but it depends on the model ordered. The model I ordered was for regular batteries not for Lithium. Make sure you order the right model for your RV.

Answer 1

Since your Progressive Dynamics converter has a dual fan setup the correct replacement would be the Lithium Converter Section part #PD4575LICSV.

view full answer...

Answer 2

If you are needing to replace just the converter section of your Progressive Dynamics PD4575K18L, you can use the #PD4575LICSV. If you are looking to replace the whole power center it will be part #PD4575K18LS8.

view full answer...

Answer 3

To replace the converter in your Progressive Dynamics RV Power Control Center PD4575K18LS8 you will want the Replacement Converter Section for Progressive Dynamics 4500 Series RV Power Control Center - 75 Amp item #PD4575CSV. This works with lead…

view full answer...

Answer 4

Hey Jeff, thanks for reaching out! Yes, the Progressive Dynamics 4500 Series RV Converter w/ Charge Wizard #PD4560K18LS8 is compatible with lithium batteries. All you have to do is swap the jumper over to the "LI" side (see attached photo)…

view full answer...

Answer 5

Hi Gary; it looks like your PD4575K18LS8 is a slightly older model from before they added the output mode switch. It is very clear that it is not there from your picture. Since there is no way to add the switch you have two options to make it lithium…

view full answer...

Answer 6

The Furrion #DV1230BL RV Stereo is indeed Bluetooth Compatible with an i-phone or Android. The pairing procedure is outlined beginning on page 30 of the operating instructions/owner's manual which I've linked for you.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Will The Progressive Dynamics PD4575LICSV Work With Non-Lithium Batteries?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching