What Wet Bolt Kits Work With Road Armor Equalizers LC696740

Updated 05/26/2023 | Published 05/25/2023

Products Featured in This Question

Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs - 3" Long

(748)

$9.66

Dexter Bronze Bushings - Qty 4

(672)

$23.57

Replacement Standard Shackle Link - 2-1/4" Long - Zinc - Qty 1

(51)

$3.28

Lippert Tandem Axle Equa-Flex AP Kit - Wet Bolts - 3-1/8" Long Shackles

(84)

$174.19

MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps

(1915)

$116.36

Question:

I wanna purchase the road armor LC696740 kit for my camper. Just trying to find which wet bolt kit to get for it. I see one that is like 280 dollars then on lippert site there is one for less than 100. Not sure on which one is recommended

asked by: Roy R

Expert Reply:

For the Road Armor Equalizers # LC696740 you're going to install on your trailer, you don't have to install the premium MORryde Wet Bolt Kit # MR76ZR you were looking at if you don't want to spend that much, you could go with the Lippert version # LC64FR instead, but you'll also need (2) of the bronze bushing kits # K71-291-00 to replace the nylon bushings in your leaf springs.

The MORryde kit is much more heavy duty, and includes these bushings already so it's a bit more expensive but you can get away with the thinner shackles included with the Lippert kit and be fine.

You do need to know what length your current shackles are by measuring them center to center of the holes. The # LC64FR is 3-1/8", or if you need the shorter 2-1/4" shackles there isn't a kit but you'd need the following parts and quantities:

(8) Shackles # LC122487
(6) Wet Bolts w/ Nuts # 126B2