Replacement Galvanized Hub For a Dexter 8-259 with a 1" Straight Spindle
Updated 05/01/2026 | Published 04/25/2026
Products Featured in This Question
Question:
Is there are a galvanized hub for my old Dexter 8-259 with 1inch think straight spindle? It is for a 13inch wheel, 5 lug. Thx
asked by: Brandon R
Expert Reply:
Hey, Brandon!
Good news, we have exactly what you want.
The Dexter Trailer Idler Hub # 8-258-50BTUC1 is a great match. It’s galvanized for corrosion resistance and comes as a complete kit with bearings, races, seals, lug nuts, and a center cap, so you’ll have everything you need to get it installed.
If you’re planning to replace all the hardware while you’re in there, you might also want to pick up the kit # CE552QR. That will cover things like the castle nut, washer, and cotter pin for one axle.
Are you working on a boat trailer?
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Idler Hub
- Standard
- L44643 / L44643
- Marine Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Search Results: replacement spindle washer
- Search Results: trailer spindles accessories and parts
- Search Results: trailer hub
- Search Results: 1" spindle nut
- Search Results: 1 1/16 bearing kit
- Shop: Trailer Idler Hub Assembly for 2,500-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Search Results: bk1 150 bearing kit
- Search Results: castle nut
- Shop: CE Smith Spindle Nuts, Washers, and Cotter Pins for 1" Axle - Qty 2
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Video: Review of CE Smith Trailer Axles - Axle Spindle Parts - CES52QR
- Shop: Washer For 1" Spindle
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Video: Replacement Trailer Hub Bearing Spec Review
- Shop: Trailer Spindle Nut 1"
- Shop: Complete Bearing Kit with L44649 Inner/Outer Bearings and 10-9 Grease Seal Fits 1.063" Spindles
- Q&A: Replacement Hubs for 2,700 lb Axle
- Q&A: What Size Socket Works with 1 Inch Spindle Castle Nut # 165686?
- Shop: Tonneau Cover
- Video: Breaking Down the etrailer Electric Trailer Brakes
- Video: An In-Depth Look at the etrailer Electric Trailer Brakes
- Q&A: How to Remove Play and Rattle from Ball Mount in Trailer Hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Q&A: Best Suspension Upgrade for 33" Tandem Axles: Road Armor vs Dexter EZ Flex for Ember 22ETS
- Shop: Suspension Enhancement
on Trailer Hubs and Drums
Crl116
4/29/2026
I purchased these hubs and bearings last year for my trailer as well. They worked out just fine. Easy to install. The only problem I had was taking off the race on the inner bearing. I drove for several miles before someone pulled up on the side of me to let me know that my wheel was smoking! It got so hot that the inner bearing race welded itself to the spindle! I had to use an angle grinder to cut it off! I also bought Bearing Buddies to use instead of the caps that came with the hubs. All-in-all it was a positive experience with the hubs and working with etrailer.