bing tracking image
Q & A Icon

Looking For New Leaf Springs And Hardware For 2017 Interstate 7k Enclosed Trailer  

Updated 04/29/2026 | Published 04/19/2026

Question:

I am looking for leaf springs and hardware kit for a 2017 Interstate 7k enclosed trailer. Can you assist me?

0

Expert Reply:

Hey Mike, thanks for reaching out. Yes, we should have the leaf springs and hardware you need, but those parts aren't make and model specific to your trailer, so I will need a bit more information from you.

For the leaf springs, I'll need to know the length of the current leaf springs, as well as the weight capacity of each axle. its best to jack up one side of the trailer so you can measure each spring when not under a load. Double eye leaf springs are measured center eye to center eye across. Then there should be a sticker or tag on the axle that shows the weight capacity.

For example, the 4-Leaf Double-Eye Spring # e54SR is 25-1/4" long and rated for a 3,500 lb axle.

For the hardware, the bolts are a standard size, so I'll just need to know the length of the current shackle straps to make sure we match that up. Shackles are measured center hole to center hole.

For example, the MORryde Suspension Upgrade Kit for Tandem Axle Trailers # MR46ZR comes with 2-1/4" long HD shackles, bronze bushings and wet bolts.

Get me that leaf spring and shackle info when you get a chance and I'm happy to look into it and make sure you get the right thing.

expert reply by:
0
Jesse M
MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps
MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps
(click to enlarge)
Mike N. profile picture

Mike N.

4/23/2026

I know it has 3500 lb tandem axles. When I get a chance I will get the measurements you requested.

Jesse M. profile picture
Etrailer Expert

Jesse M.

4/24/2026

@MikeN Sounds good! You know where to find me when the time comes. We'll get you all set up
Mike profile picture

Mike

4/25/2026

@JesseM I measured the leaf springs and they are 25 1/4". What about u bolts and equalizers? I would also need those and i see that wet kit just has the bolts and shackles?
Jesse M. profile picture
Etrailer Expert

Jesse M.

4/27/2026

@Mike Ok perfect! The # e54SR leaf spring I mentioned above will work great for that. You will indeed need new U-bolts and for that I recommend part # CE23002 (one kit per axle). As far as the equalizers, we can help replace those also. I'll need to know the dimensions of the current equalizer so we can match that up. Those are measured center hole to center hole across. Then measure the distance from that line to the center of the top hole. Its critical the replacement equalizer matches those dimensions exactly. Hopefully we can do an upgraded equalizer like part # MR87ZR. This is 6-1/2" long and 3-1/4" tall. Let me know those dimensions and I'm happy to look into it.
See All (13) Replies to Mike N. ∨

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>