Need U-Bolt Sets to Mount Karrite Voyager Cargo Box on Nissan Pathfinder

Question

Question:

I need to mount a Karrite Voyager cargo box onto my Nissan Pathfinder with roofrack and crossbars. Do you have matching u-bolt sets in stock for the Karrite Voyager? Thanks

asked by: Joe E

0

Expert Reply:

I spoke with my contact at Thule, the company that purchased Karrite, and she said that you will need the Replacement U-Bolts, # TH02943, and the Replacement Wingnut, # TH04877, to mount your Voyager cargo box on your Nissan Pathfinder.

Each piece is sold separately so for a complete set you will need:
# TH02943 Qty 4
# TH04877 Qty 8

expert reply by: Leah S

0

Answer 1

Hi Jackie! Back in the day Thule made most of the cargo boxes for Sears, thankfully, Thule makes Replacement Hardware Kit for Searsbox Cargo Box part #TH05603 that will work perfectly for you. This kit contains the exact U-bolts that you'll need…

view full answer...

Answer 2

I went out to the warehouse and measured a Replacement U-Bolt, #TH02943. The center to center distance between each end of the u-bolt is 4 inches. It is 2 inches deep in the center. The cross bars on your Volvo XC90 would have to be smaller than…

view full answer...

Answer 3

The bolt to bolt spacing on the Replacement U-Bolt for the Thule Sidekick item #TH02943 is 4". It is 2" deep overall. I have linked a diagram below that will show you these measurements and a couple more. They are different dimensions along…

view full answer...

Answer 4

Yes, the u-bolts of the Replacement Hardware Kit for Searsbox Cargo Box #TH05603 are the same dimensions as the #TH02943.

view full answer...

Answer 5

The Thule Sidekick Roof Mounted Cargo Carrier Box #TH78GC uses a U-Bolt #TH02943 that is 3-3/16" wide. I have included an image below with the measurements for this U-bolt.

view full answer...

Answer 6

Hi Jeremy; the lock assembly varies on some of the old X-Cargo boxes but if your design matches the #SR03807 you can use this as a replacement. The U-bolts on most can be replaced with the #TH02943 but I would also match up the dimensions to what you…

view full answer...

Answer 7

Yes, the Sears X-Cargo Cargo Box will fit onto the factory crossbars on your 2021 Toyota RAV4. If you need a new set of mounting hardware for your Sears cargo box, then you'd just need the Replacement Hardware Kit for Searsbox Cargo Box…

view full answer...

Answer 8

Hey Brian, it sounds like you are looking for just the u-bolt part #TH02943 which is the U-bolt of the part #TH05603 that you asked about.

view full answer...

Answer 9

According to Thule, who manufactured that box, the mounting holes in the underside of that box should be about 4 inches apart. If that's indeed the case, the #TH02943 would be the correct U-bolt.

view full answer...

Answer 10

If you're needing a u bolt that has a width of 4 inches and a height of 2 inches you can use this replacement U-Bolt #TH02943. If you're needing a 3-1/2 inch wide U-Bolt that's only 1-5/8 inches tall you can use this U-Bolt #1500052553.…

view full answer...

Answer 11

Yes, the Replacement Plated U-Bolt Bracket #TH03918 does fit the Replacement U-Bolt for Thule Sidekick Cargo Item #TH02943.

view full answer...

Answer 12

Thank you so much for the info and pictures! The correct replacement key for your lock for is part #THKEYN2982 and the correct replacement mounting hardware is part #TH05603. The mounting hardware does look a little different than the original…

view full answer...

Need U-Bolt Sets to Mount Karrite Voyager Cargo Box on Nissan Pathfinder

Products Featured in This Question

Continue Researching