bing tracking image
Q & A Icon

Electric Brakes for 2021 ShoreLand'r Boat Trailer With 3,500 lb Axle  

Updated 04/08/2026 | Published 04/03/2026

Question:

Looking for a complete kit to put electric brakes on a 21 shorelander trailer with a 21crestliner 1650 fish hawk on it,boat and trailer fully loaded is about 2750 pounds.have control in 24tacoma came with and seven way plug at back truck. Would need everything from truck back. Looks like a 3500 lb axle thank you for your help in this matter. Randy Holben

0

Expert Reply:

Hey Randy! We don't have a single kit but I can help you put together the parts you need to add brakes. It sounds like you don't already have brakes, so you need to make sure you have a brake flange on the axle.

Without the brake flange you won't be able to install any kind of brakes on the trailer. Assuming this is a 3,500 lb axle it will look like # 4-35 with 2-7/8" spacing on center. If you don't have a brake flange you either need to add one at an axle shop or replace the axle.

Do you know the bolt pattern on your hubs? More than likely it is 5 on 4-1/2 so you can use the Trailer Hub and Drum Assembly # AKHD-545-35-K. This is designed for 3,500 lb axles with a #84 spindle (L68149 inner and L44649 outer bearings). You can pair these with the etrailer Electric Trailer Brakes # AKEBRK-35-SA.

The only thing left is the wiring. You can add a 7-way using the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box # e99011. You will tie the existing lights into the junction box and then run # 10-1-1 back to your brake assemblies.

Where are you headed next with your boat once you get the brakes installed? Do you have a brake controller for your 2024 Tacoma?

expert reply by:
0
Robin H
etrailer Electric Trailer Brakes
etrailer Electric Trailer Brakes
(click to enlarge)

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>