Is There etrailer Location Near Kansas City

Question

Question:

Do you have any locations in KC area?

asked by: Rock W

0

Expert Reply:

Hey Rock, we have a dealer locater that I linked on this page that can help you find one of our dealers in your area who you can order from us through but we only have the one physical location currently in Wentzville MO. Are you curious about the etrailer enclosed cargo carrier # e54VV?

expert reply by: Jameson C

0

Cargo Carrier
(click to enlarge)

Answer 1

We sure do Brady! The Light Kit item #e67RV is exactly what you'll need for the etrailer Hitch Cargo Carrier Cage Kit for 24x60 Hitch-Mounted Carriers item #e42MV. The Light Kit item #e67RV includes two 15-9/16" long x 1-5/16" tall x…

view full answer...

Answer 2

Hey Tony! Yes, the etrailer Cage Enclosure #e82FV will fit your Curt 60x24 Hitch Cargo Carrier #C18152. We actually sell them together as the #C63ZJ. Check out the attached picture. If you want a cover to go with it we also have the Cargo Cover for…

view full answer...

Answer 3

Hi Alex; the 24x60 etrailer Enclosed Cargo Carrier #e54VV can only be used when fully assembled. This includes the top/lid of the cage. Do you have some extra tall cargo that would have to stick out of the top?

view full answer...

Answer 4

Although nothing is completely theft-proof when placed in an open cargo carrier like part #C18110, you can take some measures to make it a lot tougher for thieves. If the cargo can be placed in one container or bag like the etrailer Cargo Bag, part…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 12

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...