Are etrailer Horizontal E Tracks Electro-Galvanized or Hot-Dip Galvanized?

Question

Question:

Is Part Number: e62VR electro-galvanized or hot-dip galvanized?

asked by: Fred

0

Expert Reply:

Welcome back Fred! I reached out to our quality department and found out the etrailer Horizontal E Track item # e62VR are electro-galvanized. This method ensures corrosion resistance for both interior and exterior use.

The etrailer Horizontal E Track item # e62VR comes with four tracks that are 94" long x 4-15/16" wide x 1/2" tall. They work with E track straps, anchors, hooks, baskets, and other accessories. They can be mounted on the floor or horizontally on a wall.

What kind of trailer are you waning to install the E Track system in and what do you plan on using them for?

You can add this information, along with any other questions you have, where it says Add Comment.

expert reply by: Jerred H

0

John M.

3/24/2026

I have two rows of E-track in three enclosed trailers. I have both galvanized and black. one trailer I've had 13 years and other trailer 9 years with zero issues. very easy to install.

Answer 1

Hey Ed, welcome back! As long as the Big Truck Big RV Tongue Weight Scale #BTBRV004 is on a hard flat surface that does not flex it will work just fine. So you can use a spacer of some type to take up the extra space needed with this and it will work…

view full answer...

Answer 2

Hello Lisa. yes, propane weighs 4.2 lbs per gallon. RV batteries can be quite heavy depending on battery type and size. For a few examples, the Go Power Lithium RV Battery #34282738 is a 100ah battery and it weighs 36 lbs. A similar 100ah AGM…

view full answer...

Answer 3

Hey Tony, great question, and you are definitely not alone, this is one of the most confusing parts of towing. The weight of your weight distribution hitch, including the shank and ball mount that slide into the receiver, counts against your truck’s…

view full answer...

Answer 4

Hi David! There are a few options for rock guards that will work with the Blue Ox base plate #BLU83UR and the Demco Excali-Bar II tow bar. First would be something like mud flaps like the BulletProof Hitches Adjustable Mud Flap System for 2",…

view full answer...

Answer 5

Since the slot dimensions and capacity of different brands of E-Track are identical, really the only differences are the finish and the lengths the tracks are sold in. If you're using the E-Track in an area where aesthetics are important, you can…

view full answer...

Answer 6

Hey Ted, thanks for reaching out. I went out to our warehouse and measured the Dexter Light Box Guard #DX99VC. The oval cutout is indeed 6-1/2" long x 2-1/2" tall. The 2" side light is supposed to be just a clearance light for…

view full answer...

Answer 7

You should use the backing plates instead of U-bolts in order to install the etrailer Horizontal E-Track - Galvanized Steel - 2,000 lbs - 94" Long #e62VR. U-bolts won't allow for the most secure mounting of the E-track, so you really do want…

view full answer...

Answer 8

You can use either wheel nets or wheel straps with the Erickson E-Chock Wheel Chock for E-Track #EM09162 (this is a quantity of one strap but can be ordered in a pair at part #EM09162-2). I recommend the Erickson Adjustable Wheel Net with E-Track…

view full answer...

Answer 9

I really wish there was an easy answer as to a safe track spacing with the Erickson E-Tracks #EM59150 to accommodate most vehicles, but the truth is that there are just too many possible widths to comfortably answer this without actually figuring out…

view full answer...

Answer 10

For your Aluma 6810 HBT trailer, I recommend the Erickson Horizontal E-Track - Zinc Coated Steel - 2,000 lbs - 5' Long - Qty 1 #E19148 along with the E-Track Backing Plate - Zinc Plated Steel - 6" Long x 6" Wide #e96RR. This will save…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Are etrailer Horizontal E Tracks Electro-Galvanized or Hot-Dip Galvanized?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching