Looking for Replacement Bearings for 4,400 lb Axle of 2021 Grand Design Imagine 2800BH
Updated 03/20/2026 | Published 03/18/2026 >
Question:
I have a 2021 grand design imagine 2800bh. I am looking to replace my bearings and seals. I looks like my axle weight is 4,400. Do you sell a kit that has the seals and bearings. Or do you know what i need. Thanks
asked by: justin H
0
Expert Reply:
Can you get me the brand of your axle? The 4.4k axle is pretty unique and the different brands use different bearings unlike basically all other standard trailer axle capacities.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Replacement Race LM67010 for Bearing LM67048 - Qty 1
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 2.328 Inch O.D.
- Bearing LM67048
- Race LM67010
- 5200 lbs Axle
- 6000 lbs Axle
- etrailer
more information >
Continue Researching
- Search Results: trailer tires and wheels
- Shop: Kenda Karrier KR35 ST175/80R13 LRD Radial Trailer Tire w/ 13" Black Mod Wheel - 5 on 4-1/2
- Search Results: brake drum
- Search Results: trailer hubs and drums
- Search Results: trailer drum
- Video: Review of Kenda Trailer Tires and Wheels - Karrier KR35 ST175/80R13 Radial Black Mod - KE64AJ
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Drum - AKHD-545-35-EZ-K
- Shop: Kenda Karrier KR35 ST175/80R13 LRC Radial Trailer Tire w/ 13" Black Mod Wheel - 5 on 4-1/2
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Galvanized
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 10" - Left/Right Hand - 3,500 lbs
- Video: Easy Grease Trailer Hub/Drum Assembly for 3.5K Axles Review
- Video: In-Depth Review of the Tandem Axle Trailer Fender
- Video: etrailer Easy Grease Trailer Hub and Drums Installation - 2020 K-Z Sportsmen Classic Travel Trailer
- Shop: Tandem Axle Jeep Style Trailer Fenders - 65" Long - Diamond Plate Aluminum - Qty 1
- Shop: Tandem Axle Trailer Fender - Bolt Together - Steel - 14" to 15" Wheels - Qty 1
- Shop: Trailer Hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer hitch
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Q&A: Comparing Kenda KR03, KR35, And KR53 Tires
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Suspension Enhancement
- Search Results: trailer jack
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Search Results: trailer wiring


John
3/20/2026
I have a Rosborough 24' cabin cruiser on a SHOReland'r 2 axle trailer. Boat is 7,000+ lb and I needed to replace inner and outer bearings and seals on all 4 wheels. I had VERY little information on the trailer and just about nothing on the bearings and seals. You are going to need a good set of micrometer measuring calipers or full size set of micrometers to help you get the right parts. The races and bearings all should have part numbers etched or stamped into them but reading the numbers may be tough. Read what you can see, but ALSO measure them with the mike. Etrailer has good information available as to the actual sizes for their bearings, races and seals and you're going to have do some skipping around on their site to get parts that measure what you need. I did all that but also managed to order the wrong size seals. Returning them was no problem at all. Getting the races and bearings off on my trailer was a MAJOR chore, and I needed 3 different pullers and some major pounding to get the inner races to finally come loose. Use home made rust buster made from 1/2 acetone and 1/2 power steering fluid. Better than ANYTHING on the commercial market. Hope this helps.