Can The Westin Hard Tri-Fold Tonneau Cover Work If I Have an OEM Bed line In a 2024 Ford Maverick

Question

Question:

Sirs: I have a 2024 Maverick XTL with the OEM -in liner. Does this Westin Hard Tri-fold work with that setup? Most of the install videos I see are done on trucks with spray on liners. Or can you suggest another hard fold up one for me to look at. Thanks

asked by: Douglas F

0

Expert Reply:

Hey, Douglas! Happy to help.

There are no installation notes in the instructions for the Westin Hard Tri-Fold Tonneau Cover part # W83VM stating that it will not fit with the OEM bed liner. So I did a little digging on Fords website for information to see what they had to say. Ford states that their OEM liner will not interfere with installing tonneau covers.

You will have no issues installing and using the Westin cover on your 2024 Ford Maverick.

Are you planning to cover gear with the tonneau, or are you just looking to keep the bed covered when it’s not in use?

expert reply by: Gwendolyn Y

0

Westin Hard Tri-Fold Tonneau Cover
(click to enlarge)

Douglas F.

3/3/2026

Gwendolyn: Thank you for taking the time to find an answer to my question. The planned use is to cover luggage when we do family road trips, also keeping all the #@%$@! pine needles from my trees out of the bed would be a plus. Douglas

Gwendolyn Y.

3/4/2026

@DouglasF As much as I like and enjoy pine trees, the needles are on the same level as Easter grass and Legos on the floor.

Answer 1

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 2

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 3

Hey Will! I would be happy to help you get the best setup for your 2026 Ford Maverick Hybrid. You will need a tow bar, base plate kit, safety cables, wiring, and a supplemental brake system. I recommend the following: -Roadmaster Direct-Connect Base…

view full answer...

Answer 4

Hey Don, congrats on the new truck and thanks for all of the information! I recommend the Roadmaster Direct-Connect Base Plate Kit - item #RM87NQ. Roadmaster's baseplate kits and wiring set the standards for flat towing as far as quality and…

view full answer...

Answer 5

Good afternoon Steve and congrats on the new truck! To flat tow a 2026 Ford Maverick Lariat, I recommend the following parts: Tow Bar and Safety Chains - etrailer SD Non-Binding Tow Bar for Blue Ox Base Plates item #e47ZR Baseplate Kit - Blue Ox Base…

view full answer...

Answer 6

Hello again, Dan. Thanks for writing in. The Demco Stay IN Play DUO Inline Air Pressure Regulator #DM88UV will not be needed for your 2025 Maverick Hybrid. You can still install one to lessen the braking pressure if it seems too harsh, but it…

view full answer...

Answer 7

Hey Dave! The Ford Maverick AWD Hybrid is a really popular flat tow vehicle, so we've got everything you need on that flat tow but you'll always want to consult your owner's manual just for the extra surety that you're able to flat…

view full answer...

Answer 8

Hey Steve, thanks for reaching out! The Roadmaster Direct-Connect Base Plate Kit #RM87NQ fits your 2025 Ford Maverick as long as it's the Hybrid model that doesn't have the engine block heater. It doesn't come with the 6-Pin connector,…

view full answer...

Answer 9

Hey Bob! We are ahead of manufacturer fitment pretty often, and have confirmed that the Demco Tabless Base Plate Kit #DM38CV will fit the 2026 Maverick Hybrid. Our own etrailer Invisible Base Plate Kit #e96GV shares the same design so you can use…

view full answer...

Answer 10

Hey Glen, congrats on the new Maverick! I like your list of parts so far. They're solid reliable options that are definitely compatible with your new 2026 Ford Maverick Hybrid. Here are the rest of the parts I recommend installing in addition to…

view full answer...

Answer 11

Hello Dan, thanks for reaching out. We can definitely provide the full flat tow system for your 2026 Ford Maverick XLT Hybrid. Here is what I recommend: - Demco Tabless Base Plate Kit - Removable Arms #DM38CV - etrailer XHD Non-Binding Tow Bar - RV…

view full answer...

Answer 12

Hey Jeff, yes the Pace Edward Switchblade tonneau cover part #PE66QJ that you referenced will definitely work with your Magnum headache rack. Your headache rack attaches to the top of your bed rails and this tonneau cover installs between the bed…

view full answer...

Can The Westin Hard Tri-Fold Tonneau Cover Work If I Have an OEM Bed line In a 2024 Ford Maverick

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching