bing tracking image
Q & A Icon

Installing Curt Wiring Harness on 2024 Subaru Outback Touring  

Updated 03/04/2026 | Published 02/28/2026

Question:

2024 Subaru Outback Touring I purchased curt towing wiring. At the rear passenger side there is a 10pin socket as in the attached picture. Totally different from curt socket. Please advice

0

Expert Reply:

Hello Fernando; did you find that connector in the same location as the picture below? Sometimes there is more than one connector hidden away in the vehicle. We installed the # C56040 on a 2025 Outback and the the connector was in the same location as the picture, not where the written directions state it is located.

I attached the installation video further down on this page for your reference as well. Another customer found the connector in the same location on their 2022 Outback so I don't think it would change between 2022 and 2025.

expert reply by:
0
Robin H
2025 Outback Connector
2025 Outback Connector
(click to enlarge)
2022 Outback Connector
2022 Outback Connector
(click to enlarge)
Fernando M. profile picture

Fernando M.

3/3/2026

Yes, it is exatcly the same location, however, the plug is different. I ran some test, and the pins are for tail lights, turn signal, etc.

Robin H. profile picture
Etrailer Expert

Robin H.

3/4/2026

@FernandoM if the connectors still fit together you could re-pin it, otherwise you're stuck with splicing. There are no other wiring harnesses out there for a different connector.
Fernando M. profile picture

Fernando M.

3/4/2026

@RobinH Thank you for the prompt reply.
Randy profile picture

Randy

3/4/2026

This is the connect I purchased and used on my 2025 Subaru Outback Touring XT, it worked perfectly. C56040 - Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>