Do You Have a Replacement Hub for a Straight Spindle w/ LM11949 Bearings?
Updated 03/04/2026 | Published 01/30/2026
Products Featured in This Question
Question:
Im looking to replace hubs on an old Kayak trailer I have which uses a 3/4 inch straight spindle and both inner and outer bearings are LM11949. What options do you have. Wasnt able to understand when I searched if the pre-packed hub with this configuration is available. Thanks.
asked by: oren B
Expert Reply:
Hey Oren, thanks for the information and welcome back! We do not have any replacement hubs with item # LM11949 inner and outer bearings so that would explain your difficulties tracking one down.
I saw you were looking at the Trailer Idler Hub Assembly for 3,500-lb Axles item # AKIHUB-5475-35-K. This hub has a 5 on 4-3/4 lug nut pattern and fits a common #84 spindle with inner bearing item # L68149 and outer bearing item # L44649.
My only option to replace your hub is going to be to cut off your old spindles and install new ones like item # TRU84FR that have a common size for a replacement hub. This one is 11-1/4" overall and has a 1-3/4" diameter.
What lug nut pattern do your wheels/hubs currently have and are you interested in replacing your spindles?
You can add this information, along with any other questions you have, where it says Add Comment.
(click to enlarge)
Product Page this Question was Asked From
Replacement Trailer Wheel Bearing - LM11949 - Qty 1
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- .75 Inch I.D.
- Bearing LM11949
- Race LM11910
- 3000 lbs Axle
- etrailer
more information >
Continue Researching
- Search Results: 5/16 inch diameter trailer safety chains
- Shop: Curt Trailer Breakaway Kit with Trickle Charger, LED Tester, and 5 Ah Lead Acid Battery - Side Load
- Shop: BulletProof Hitches 5/16" Safety Chains with Clevis Hooks - 38" Long - 18,800 lbs - Qty 2
- Shop: 42" Long Safety Chain with 5/16" Clevis Slip Hook - 5,000 lbs - Qty 1
- Search Results: #84 spindles
- Video: Review of CE Smith Trailer Spindles - Standard Spindle - CES98WR
- Q&A: Best #84 Spindle and 5 on 5-1/2 Hub for 3,500 lb Trailer Axle
- Shop: CE Smith Tapered Spindle Axle - Weld On - 1-3/8" to 1-1/16"
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Shop: #84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter
- Q&A: Replacement Spindle and Hub for my Lippert 3500# Axle
- Q&A: What Bearing Diameter Is Used With the #84 E-Z Lube Spindle TRU74FR
- Q&A: Replacing a Hub on a #84 Spindle
- Q&A: Mounting Bolt Pattern of 10 Inch Electric Drum Brake Assemblies
- Q&A: How to Find Replacement for TDE 11029C Hub Assembly
- Q&A: Can The Hubs On a M1102 Light Tactical Trailer Be Converted To a 5 on 5-1/2" Bolt Pattern?
- Shop: Trailer Wheel Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Search Results: trailer hitch
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Search Results: trailer tires and wheels
- Article: Trailer Lighting Requirements
- Shop: Suspension Enhancement
- Search Results: trailer wiring
- Search Results: trailer jack
- Shop: Brake Controller
- Shop: Base Plate for Tow Bar
- Search Results: trailer lights
Jerred H.
3/4/2026
Hey Oren, did you get a chance to check your wheel’s lug nut pattern or decide if you want to replace the spindles on your kayak trailer? Once you know that, it’ll be easier to narrow down the right hub setup. Let me know what you find—I’m here if you need a hand sorting through the options.