Will Timbren SES Require Spacers on 2023 Toyota Tundra TRD With Factory Lift

Question

Question:

Good morning, I am trying to confirm proper part numbers for 2023 Toyota Tundra Timbren SES and spacer kit due to the factory TRD lift kit. thank you,

asked by: Chris S

0

Expert Reply:

Hey Chris! Timbren does recommend using the spacers # T33AV on your 2023 Tundra TRD with the factory lift. This will give you the correct gap when installing the Timbren Suspension Enhancement System # T45MR so it engages properly.

Are you adding these for towing or something else?

expert reply by: Robin H

0

Spacer Kit
(click to enlarge)

Robin H.

2/10/2026

Hey Chris, how did the Timbren suspension system and spacer kit work out on your Tundra with the TRD lift? It’d be great to hear if the setup gave you the right engagement and ride feel. Your update could make it easier for others with the same lift.

Answer 1

To help with the sag of your 2016 Toyota Tundra I recommend going with Timbrens, as they are designed to take the brunt of the added weight when you tow. They will engage when needed to counteract both sag and body roll to help level your truck,…

view full answer...

Answer 2

The #AL24JQ will fit your lifted setup on your 2023 Toyota Tundra. However, I would not count on them for off-road use. I'm afraid they would not last and rip off of the end plates. It also would not be covered under their warranty if they were…

view full answer...

Answer 3

I went out to our warehouse and measured an overall height with the mounting bracket of 5 inches for the Timbren Rear Suspension Enhancement System #TTORSEQ. Timbren recommends having a 1/2 inch to 1-1/2 inches between the spring and the axle when…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 6

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 9

Hello Barry, Since you already have a weight distribution (WD) hitch and are only experiencing a little rear sag, I recommend going with SumoSprings. I typically only suggest Timbrens for those who are towing heavy loads regularly, as they can create…

view full answer...

Answer 10

The differences between the Firestone Ride Rite #F2613 and the Red Label #F2709 for your 2023 GMC Sierra 3500 Crew Cab Long Bed is the air pressure and max weight capacity. The Ride-Rite #F2613 are rated for 5,000lbs and 100 PSI, where the Red Label…

view full answer...

Answer 11

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 12

Hi Bill! Thanks for your pictures, they were extremely helpful! ^___^ The LCI Part #194170 on that tag you found means you have a 1621 pin box. The Gen-Y #GY45SR you were looking at is specifically for the Lippert 1116 and 1716 pin boxes, so you will…

view full answer...

Will Timbren SES Require Spacers on 2023 Toyota Tundra TRD With Factory Lift

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching