What is Valve Stem Hole Size of Aluminum Phoenix Trailer Wheel # LH88VR
Updated 01/21/2026 | Published 01/20/2026 >
Products Featured in This Question
Question:
What is the valve stem hole diameter on this wheel? I’m looking to use with Ford Trailer TPMS sensors that are only compatible on wheels with 0.452 in 11.48mm diameter valve stem hole.
asked by: Charles M
Expert Reply:
Hey Charles, the hole for the valve stem on the Aluminum Phoenix Trailer Wheel # LH88VR is 0.625". This is going to be the case for any wheel that is over 15". 8"-15" wheels use the 0.453" holes and wheels over 15" use the 0.625" holes.
I am not sure if you are open to a different TPMS system that is compatible but we have the Tuson Towable Tire Pressure Monitoring System # 335TPMS4WIVS which works with both the 0.453" or 0.625" diameter valve stem holes.
Product Page this Question was Asked From
Aluminum Phoenix Trailer Wheel - 17-1/2" x 6-3/4" Rim - 8 on 6-1/2 - Black
- Trailer Tires and Wheels
- Wheel Only
- 17-1/2 Inch
- 8 on 6-1/2 Inch
- Aluminum Wheels
- Lionshead
more information >
Continue Researching
- Shop: Aluminum Phoenix Trailer Wheel - 17-1/2" x 6-3/4" Rim - 8 on 6-1/2 - Black
- Shop: Lionshead Trailer Wheel Lug Nut - 9/16"-18 - Stainless Steel - Qty 1
- Search Results: latch
- Shop: Go Power Inter-Battery Communication Cable for 300 Amp Sun Cycle Advanced Lithium Batteries - Qty 1
- Search Results: trailer hub cap
- Shop: Global Link Vise Lock for Cam-Action Door Latch - Keyed Alike Option - Black
- Shop: Bauer Products Locking Cam Latch for Cargo Trailers - Matte Black - 300 Series Key
- Video: Feature Review Lionshead Trailer Wheel Center Cap w/ Snap-In Plug
- Video: Ultimate Overview of the TireMinder 4-Hose Inflation Kit
- Shop: Taskmaster Trailer Wheel Center Cap w/Center Plug - 4.25" to 4.27" Pilot - Stainless Steel
- Shop: Wheel Masters 4-Hose Inflation Kit - 16", 16-1/2", 19-1/2" Dually - Wheel Cover Mount
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Search Results: trailer tires and wheels
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer hitch
- Q&A: Comparing Kenda KR03, KR35, And KR53 Tires
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Q&A: Which is Better for Highway Use 4.80-12 or 5.30-12 Trailer TIres
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Suspension Enhancement
- Search Results: trailer wiring
- Search Results: trailer jack
- Shop: Brake Controller
- Article: How to Measure for Trailer Hitch Drop
- Q&A: What is the Difference Between Load Range C and D ST175/80D13 Trailer Tires
- Shop: Gooseneck Hitch
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)


Floyd R.
1/21/2026
Hi Charles, these 17.5 wheels have the larger commercial size valve stem holes due to the higher pressure and carrying capacity. The snap in TPMS valve stems that most vehicle manufacturers use don’t carry the pressure rating required. You can look into having the sensors banded onto the wheels though, we used to do that in my tire shop days.