What Vehicles Does The Blue Ox Base Plate Kit BX1852 Fit?

Question

Question:

BX1852 I have this model, and I would like to know which cars it will fit.

asked by: Gor Y

0

Expert Reply:

Hello Gor, thanks for reaching out. The Blue Ox Base Plate Kit # BX1852 will fit the following vehicles:

2015 - 2019 Nissan Versa Manual transmission
2014 - 2017 Nissan Versa Note Manual transmission

Do you have a 2019 Nissan Versa you need to set up to flat tow? I am happy to provide a full parts list if you wish. Let me know!

expert reply by: Jesse M

0

Jesse M.

1/27/2026

Hey Gor, did you end up using the Blue Ox base plate kit on your Nissan Versa? Sharing how it worked could help others looking to set up the same vehicle for flat towing.

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 3

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 4

Yes. You'll be able to make all Blue Ox base plates like the Blue Ox Base Plate Kit - Removable Arms #BX2227 work with any Blue Ox tow bar. This is typically the case between manufacturers and there are now typically adapters available to make…

view full answer...

Answer 5

Hey Brian, since you have a Roadmaster tow bar the correct base plate kit you'd need is the part #RM-521453-5. Then for wiring you'd want the Roadmaster diode kit part #RM-15267 and you'd have everything cover since you already have…

view full answer...

Answer 6

Hey Mike! Welcome back that is a great question. I am a big fan of both and at the end of the day they serve the exact same function as proportional braking systems. The main difference is going to be the installation process you're concerned…

view full answer...

Answer 7

The Mopar Flat-Tow Wiring Harnesses are no longer required on newer Jeeps such as a 2020 Jeep Grand Cherokee. I have attached a list of parts that you will need to flat-tow said vehicle below. The battery charge line is not required. etrailer…

view full answer...

Answer 8

There are no differences between the Demco Tabless Base Plate Kit part #DM9519291 and etrailer Invisible Base Plate Kit part #e98950, this is just who we use for our braded base plates. I recommend whichever is more cost effective at the time. They…

view full answer...

Answer 9

Yes! To cover the holes when the pins are removed from the Blue Ox Base Plate Kit #BLU23XR on your 2022 Ford Bronco you need the Replacement Cap #BLU96XR which comes with 2 of them. This will help to keep dirt and debris out during normal driving but…

view full answer...

Answer 10

Whenever you hear conflicting stories about flat towing a vehicle it is always best to turn to the owner's manual as the manufacturer (in your case GM) will have the final say. I looked up an online version of the owner's manual for your 2008…

view full answer...

What Vehicles Does The Blue Ox Base Plate Kit BX1852 Fit?

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching