GPS Tracker For Trailers That Are Store In A Warehouse With Bad GPS Signal

Question

Question:

Will these still work if my trailer is parked inside a warehouse? signal isn't always great with different frequencies and lots of buildings.

asked by: Denise

0

Expert Reply:

Denise, that’s where WiFi backup really comes in handy. The PingMaster 3000 w/ WiFi Backup # PM84FR and PingMaster 5000 w/ WiFi Backup # PM74FR can report approximate locations using WiFi and cellular triangulation when GPS satellites aren’t reachable indoors. Now they don't actually connect to a WiFi source, but use it to ping off of it.

The PingMaster 5000 # PM64FR can still fall back on cellular towers, but it won’t have the added WiFi layer. If indoor storage is common for you, the WiFi models are the safer choice.

What kind of trailer are you tracking, and is it part of a fleet? PingMaster does offer discounted service options when you’re managing multiple trailers.

expert reply by: Andrew N

0

Denise

1/5/2026

That makes sense. This is for multiple enclosed trailers that stay inside a metal warehouse most of the time, and we only move them a few times a month.

Andrew N.

1/5/2026

@Denise Thanks for clarifying, Denise. In that case, I’d definitely stick with the WiFi backup models so you still get location data even if some of the GPS signal is blocked by the building. Since you’re managing several trailers, it’s also worth asking PingMaster about their fleet service pricing - it can help keep the monthly costs down.

Answer 1

Hey Travis! Yes, the PingMaster 5000 #PM74FR will still get a signal and work inside a trailer. However, its performance will depend on the trailer's construction. A heavily shielded metal trailer may still reduce signal strength, so mounting it…

view full answer...

Answer 2

Megan, it really comes down to how often you want location updates. The PingMaster 3000 w/ WiFi Backup #PM84FR provides 3,000 guaranteed pings from the battery, which can last around 7+ years at 2 pings per day. If you want more frequent tracking or…

view full answer...

Answer 3

No long-term contract, Natalie - but a service plan is required to use the trackers. When you buy the 3000 with wifi assist #PM84FR, 5000 #PM64FR, or 5000 with wifi assist #PM74FR from etrailer, you’re purchasing the hardware/device only. To activate…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 10

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 11

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 12

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

GPS Tracker For Trailers That Are Store In A Warehouse With Bad GPS Signal

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching