What are Dimensions of MORryde RV Cargo Slide Tray # MR83FR

Question

Question:

We are looking at putting this under our bed so we do have to lift the bed everytime we need little things. Will this work measurements are 65L x 43inch W x 12inch H?

asked by: Kenny P

0

Expert Reply:

Hey Kenny, the dimensions of the MORryde RV Cargo Slide Tray # MR83FR are definitely compatible with the dimensions you have and would work great. This has the dimensions of 60" long x 42" wide x 6-5/8" tall. What will you be putting on it?

expert reply by: Jameson C

0

Kenny P.

12/31/2025

blankets, cases of water, small fans and small electric heater. Thank you so much for the fast and informational reply.

Jameson C.

12/31/2025

@KennyP Makes sense! Glad to help!

Answer 1

Hi Dennis; MCD doesn't have a set number of turns to install the MCD Innovations RV Shade Repair Kit #MC74SR. What you want to do is add some tension, test it, then adjust accordingly until you have it set the way you want it.

view full answer...

Answer 2

Hey Jenna, welcome back! To add a set of 5th wheel rails to your 2025 Chevy Silverado 2500, I recommend the B&W Custom Installation Kit w/ Base Rails item #BWRVK2505. This set of rails are industry standard and are definitely compatible with…

view full answer...

Answer 3

Hey John! The MORryde UO138-033 is the same as the 10-36 grease seal. The #RG06-070 you were looking at is the correct replacement for your 2024 Riverstone 421FK. How are you liking that suspension system?

view full answer...

Answer 4

While I was unable to confirm the exact dimensions of the Norcold 1200LRIM, I think your current refrigerator to be 63-1/4 inches tall, 32-11/16 inches wide, and 24 inches deep. Please confirm this. The Everchill RV refrigerator with freezer drawer…

view full answer...

Answer 5

The MORryde RV Cargo Sliding Tray #MR28FR is a total of 6-5/8" tall and sits approximately 1.57" off of the compartment floor. I have included a dimensional diagram of the MORryde RV Cargo Sliding Tray #MR28FR that you can take a look at.

view full answer...

Answer 6

Yes, the Furrion RV Stereo #DV1230BL is a plug-and-play replacement for your DV1220 so you'll be able to just unplug the DV1220 and plug your new DV1230 right in.

view full answer...

Answer 7

The MORryde Sliding Tray for RV Cargo Compartment - 60" x 33" - 800lbs - 1 Way #MR56FR has just over an inch of clearance from the bottom of the tray to the brackets for you to insert bolts through to mount a fork adapter like the Thru Axle…

view full answer...

Answer 8

Hey Glen, The inside tray dimensions of the MORryde RV Cargo Sliding Tray #MR73FR measures 38.85" x 46.21" (see attached photo). Yes, the 5th-Wheel-to-Gooseneck Coupler Adapter Mounting Plate #MR37ZR is made by MORryde.

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Hi Chuck! The MORryde RV Cargo Slide Tray - 72" x 26" - 1 Way Slide - 60 Percent Extension - 800 lbs #MR67FR sits 1.6 inches above the floor you mount it on. If you want or need it to be a bit higher off the floor, you can also grab the…

view full answer...

Answer 12

Hey Ethan. From the mounting point of your RV to the top of the carpeted base is going to be 2.31" on the MORryde RV Cargo Slide Tray item #MR78RV. The bottom of the tray sits 1.57" above the mounting point on your RV and the wooden base is…

view full answer...

What are Dimensions of MORryde RV Cargo Slide Tray # MR83FR

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching