Galvanized Idler Hub For 1.06" Spindle With Grease Seal With 1.25" ID And 1.98" OD
Updated 01/19/2026 | Published 12/24/2025
Products Featured in This Question
Question:
Im looking for galvanized trailer hub for 2k axle with 1.06 straight spindle. I need coated double lip seal ID1.25xOD1.98. L44649 x 2 and L44610 x 2. 5x4.5 bolt
asked by: Grant M
Expert Reply:
Hi Grant!
We have what you need with the etrailer Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized # AKIHUB-545-2-G-EZ-2K, but you will need to also grab the TruRyde Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1 # 34823 as the included seal is too large (1.50" inner diameter). We don't seem to have a full hub kit that includes the correct seal you are needing, oddly enough.
Is this going onto a boat trailer? Guessing it is since you are wanting galvanized, but was also curious.
(click to enlarge)
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-3/4 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-3/4 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-3/4 - Pre-Greased
- Search Results: trailer bearings races seals caps
- Search Results: 17~125
- Search Results: trailer tires and wheels
- Search Results: accessories and parts
- Search Results: trailer hubs and drums
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Idler Hub Assembly for 7,000-lb E-Z Lube Axles - 8 on 6-1/2 - Pre-Greased
- Search Results: recent orders
- Search Results: order
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Power Mountain Tallboy Off-Road Bottle Jack - 8-1/2" to 37-3/4" Lift - 6 Tons
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Video: A Look at the Power Mountain Tallboy 6 Ton Off-Road Bottle Jack with a Military Cargo Trailer
- Shop: Suspension Enhancement
- Article: How to Measure for Trailer Hitch Drop
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: etrailer Anti-Rattle Hitch Collar for 2" Hitch Receivers
- Q&A: Does etrailer Carry Furrion Chill Cube w/ Heat Pump to Replace Dometic Duo-Therm
- Shop: Brake Controller
- Shop: Gooseneck Hitch
- Video: How to Choose a Trailer Brake Controller
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
on Trailer Hubs and Drums
Lazer S.
1/19/2026
Hey Grant, did the galvanized Easy Grease hub and TruRyde seal end up fitting your 2K axle the way you needed? Your update could make it easier for others matching seals to similar hubs.