Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hey Bill, the Rain Blocker G2 Front Panel for Thule 10' HideAway Awning #TH301320 comes with the needed install hardware to attach to a Thule Hideaway Awning #TH490011 but not to a roof directly. Do you have a Hideaway awning already? I attached…
view full answer...Hey Nancy! The Thomas Payne RV Jackknife Sofa w/ Hinges #TP58KR doesn't have any legs. It is designed to sit on an existing base/legs which you can see examples of in the attached picture. I can't tell in the brochure if that is what you have…
view full answer...Hey Kevin! Are you replacing it because you're upgrading to lithium or is there a specific reason you don't like it? WFCO products are pretty nice, and the new WFCO Auto-Detect RV Converter Charger #WF38FR would be the direct replacement.…
view full answer...Hello again Frank; tongue weight is typically 10-15% of your trailer weight. At 5,400 lbs you could go over the max 800 lb tongue weight of the #FA94-00-0800 but that probably isn't the case here. If you really want to be sure you could always…
view full answer...Hey Edwin! If the listed dry tongue weight is 1,330 lbs you will likely be over the rating of your current SwayPro spring bars. You'll probably be adding 150-200 lbs with the propane and batteries, but that does depend on the number of propane…
view full answer...Hi Riley, Both Air Lift and Firestone transitioned to no longer offering the replacement brackets because people were purchasing the wrong ones constantly and it was causing a confusion and issues. It was also more expensive to purchase every single…
view full answer...Hey Robert, congrats on the new 5th wheel trailer! The MORryde GooseTech 5th Wheel to Gooseneck Pin Box like item #MR47MV has not been approved for use by Lippert. The only gooseneck style pin box that has are the Reese Goose Boxes like item #RP85FR.…
view full answer...I recommend disconnecting 12V electrical power from the main system control panel for a few minutes. Usually about 15-minutes without power does it. Once reconnected to power if you still have error codes, such as "Out-of-Stroke", to clear…
view full answer...Hey Sam! Yes, the BTBRV Magnetic Hitch Receiver Reducer Set #BTBRV39FR can be used for weight distribution. The reducer sleeves do not cause any kind of reduction in capacity so it is perfectly fine to use with your WDH shank. What kind of trailer…
view full answer...Hey Christopher, Yes, Equal-i-zer offers longer inner and outer link plates for 8" frames #EQ84FR and 10" frames #EQ24FR to accommodate your larger frame size.
view full answer...Hey Ira, to use an Equal-i-zer system with a 8 inch tall frame what you'd need is the part #EQ84FR which replaces the inner and outer link plates for the spring bar hanger with ones that can fit an 8 inch tall frame.
view full answer...The link plate on the Sway-Control Bracket #EQ95-01-5600 is 1-1/2" wide(see image). The good news is in the event it is too big you can reposition the Propane Tank Pan #37207-31535 on your trailer if it needs moved. You will have self taping…
view full answer...