Yakima BaseLine Roof Rack Crossbar Spread on 2017 Fiat 500

Question

Question:

Website shows that the Y67RB fits the 2017 Fiat 500. Can you tell me how far apart I can mount the 2 rails? Can I separate them by 30 inches on this car?

asked by: Paul

0

Expert Reply:

Hey Paul! The crossbar spread is going to be the M4 number listed in the installation instructions and it is a fixed distance. For the Yakima BaseLine Roof Rack # Y67RB on your 2017 Fiat 500 that is 18". You won't be able to move the crossbars around to get the 30" spread you're looking for. Is this for something specific like a roof box?

expert reply by: Robin H

0

Yakima BaseLine Roof Rack
(click to enlarge)

Paul

12/21/2025

Thanks Robin. It is for kayak saddles for carrying a sea kayak. Minimum width is usually considered 24 inches but 30 inches is preferable.

Robin H.

12/21/2025

@Paul ah yeah that is going to be the case for any of the available roof racks. There isn't a lot of space up there to begin with. You might have to tow the kayak on a trailer.

Paul

12/21/2025

@RobinH yeah, I do have a a Yakima Rack n' Roll which would be perfect for that except the National Park near me doesn't allow trailers. It appears Thule used to make a rack with extenders for the Fiat 500 to solve this issue but I guess it is not available any more.

Robin H.

12/21/2025

@Paul I suppose if you have the roof space to get them 30" apart you could use the SeaSucker Monkey Bars Roof Rack # 298-SX6000B which is universal. These things stick to pretty much any surface so as long as you could spread them far enough apart that would do it.

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 4

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 5

Hey George, for your 2026 Toyota RAV4 Hybrid we have the Curt hitch part #C34FR62ZY as a confirmed fit but it's on a little bit of a backorder at the moment which is why you don't see any hitch options in our fitguide. The hitches from…

view full answer...

Answer 6

Hi John! We definitely have hitches available for your 2026 Lexus RX350h and the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #e29ZV is a great option. The matte finish makes our hitches blend in better than…

view full answer...

Answer 7

Hey Steve, this is a really great question. So the Curt #C94WR and the etrailer part #e38KR are very similar. Only real difference is the finish. The etrailer has a matte finish and the Curt has a gloss finish. Aside from that it's exact same…

view full answer...

Answer 8

Hi Brian! The Roadmaster Falcon 2 Tow Bar for Blue Ox Base Plates - RV Mount - 2" Hitch - 6,000 lbs #RM-525 will indeed fit the #BX2805 Blue Ox base plate on your 2017 Fiat 500. This actually has the adapters included already, so you will not…

view full answer...

Yakima BaseLine Roof Rack Crossbar Spread on 2017 Fiat 500

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching