Replacement Bearing Kit for a Dexter 4,400 lb Hub
Updated 10/22/2025 | Published 04/07/2025
Products Featured in This Question
Question:
Hello I am looking for grease seals for my Dexter 4400lb travel trailer axles. I have a couple of numbers off the axle label. 120092 PO: 088-464992 D44 Capacity 4400lbs HF = 86.50 SC = 68.50 Thank you in advance.
asked by: Robert M
Expert Reply:
Hey Robert, thanks for reaching out!
To replace the bearings and seal for your Dexter 4,400 lb axle you can either use out Bearing Kit # BK2-100 or the Timken Kit # TMK52VR.
The 4,400 lb hubs use the same bearings and seal as the 3,500 lb axles which is why these work.
Let me know if you have any other questions or need to replace other parts! I've attached an installation video of this bearing kit for you to reference.
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Dexter Bearing Kit for 4.4K Axles - Inner and Outer Bearings LM67048/L68149
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Go Power RV Converter and Smart Battery Charger - 12V - 55 Amp
- Q&A: 2021 Grand Design Travel Trailer Toy Hauler Axle Components
- Search Results: 4400 lbs trailer leaf springs
- Search Results: dexter trailer leaf springs
- Q&A: Replacement Shackle/Wet Bolt Kit for MORryde CRE/3000 Axle
- Search Results: trailer suspension parts
- Search Results: suspension kits trailer suspension parts
- Search Results: tandem axle trailer suspension parts
- Video: Review of etrailer Trailer Leaf Springs - 4 Leaf Double Eye Spring 4000 lbs Trailer Axle - e22YR
- Shop: MORryde Shock Absorbing Suspension Equalizers for Tandem Axle Trailers w/ 35" Wheelbase - 8K
- Shop: 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 26" Long
- Shop: Replacement Wet Shoulder Bolt - MORryde Suspension Upgrade Kits - 9/16" x 3-3/8" - Qty 1
- Video: Timken Bearing Kit Installation - Enclosed Trailer
- Video: Review of MORryde Trailer Leaf Spring Suspension - Equalizers - MR27ZR
- Video: Review of the Suspension Kit for Tandem-Axle Trailers
- Video: Let’s Check Out the Replacement Equalizer for E-Z Flex Suspension Kits
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Wiring Diagrams
- Q&A: Bearing Kit for 2017 Jayco Jay Flight 17BH
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Bearing Kit for Lippert 4,400 lb Trailer Axle
- Q&A: Replacement Bearing And Seals For UFP Hub H-1062-2
- Q&A: Replacement Hub/Rotor and Bearings for Tie Down Engineering TDE46245
Jon G.
10/22/2025
Hey Robert, how did things go with the bearing kit for your Dexter 4,400 lb axle? Did the BK2-100 or the Timken kit end up being the right match for your hubs? Your update could make it easier for the next person with the same setup.