What is Warranty of NOCO Boost X Jump Starter

Question

Question:

What kind of warranty does it have

asked by: TomEvers

0

Expert Reply:

Hey Tom, the NOCO Boost X jump starter part # NOC88VR that you referenced has a 1 year limited warranty which means if there's a manufacturing problem it will get replaced.

expert reply by: Jameson C

0

Jameson C.

12/29/2025

Hey Tom, did the one-year limited warranty on your NOCO Boost X jump starter give you the coverage you needed? Knowing how it worked out could help others understand what to expect with their warranty.

Answer 1

Hi Alex; thanks for the photo and there are some trailer lights with that style of plug, which are bullet-style connectors such as #MCL110RKBF. That's a small clearance light, and honestly that bullet-style is pretty uncommon. So you may be able…

view full answer...

Answer 2

The best way to make water tight wire connections on a trailer are with heat shrink butt connectors; the Deka Heat Shrink Butt Connectors part #DW05743-10 for 22-18 gauge, part #DW05744-10 for 16-14 gauge, and part #DW05745-10 for 12-10 gauge. If you…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 10

Hello Matt, I was seeing some mixed information on this as well, so I reached out directly to my contact at Firestone to confirm. The Firestone Ride-Rite Air Bags w/ Easy Mount Compressor - Wireless Control - Single Path - 5,000 lbs #F44XV will fit…

view full answer...

Answer 11

Hi Kaleb, great question. I know combining air bags with a B and W Turnoverball hitch can be tricky, but there is a good option that works with your setup. With the B and W Turnoverball Hitch part #BWGNRK1108 on your 2002 Ford F250 4x4 long bed. One…

view full answer...

What is Warranty of NOCO Boost X Jump Starter

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching