Will the Curt Custom Tail Light Wiring Kit C96JR Work w/ LEDs on a 2025 Wrangler Unlimited?

Question

Question:

I have a 2025 Jeep Wrangler Unlimited. It has LED lights. Will this harness work with it? I had a 2022 Jeep Wrangler Unlimited with LEDs. At that time, there wasnt a plug and play harness available. I had to buy the one with diodes. Thanks

asked by: Jim B

0

Expert Reply:

Hey Jim. The Curt Custom Tail Light Wiring Kit for Towed Vehicles item # C96JR is indeed compatible with the LED lights on your 2025 Jeep Wrangler Unlimited. It plugs into your factory wiring harness behind the tail lights. The only issue would be if your Jeep has the ParkSense proximity sensors.

If your Jeep has the ParkSense feature you'll need the Roadmaster Smart Diode Kit for Variable Voltage LED Tail Lights item # RM47ZR.

It looks like you've purchased a few flat tow accessories recently. Is there anything else you need for 2025 Jeep Wrangler?

You can add this information and any other questions you have where it says Reply to Jerred H and I'll be happy to answer them.

expert reply by: Jerred H

0

C96JR
(click to enlarge)

Jim B.

11/23/2025

Thanks, I ordered the BLU79FR wiring set. Will this one work with the LED tail lights? Thanks, Jim

Reply

Jerred H.

11/23/2025

@JimB You're welcome! The Blue Ox EZ Light Custom Plug-In Tow Bar Wiring Kit item # BLU79FR will indeed work with LED lights.

Reply

James

11/28/2025

I've ordered the Blue Ox EZ Light Custom Plug-In Tow Bar Wiring Kit item # BLU79FR. I have LED lights and the park sense on my Jeep. With this plug-in harness work, or did I order the wrong harness? Thanks, Jim

Reply

Jerred H.

12/1/2025

@James The Blue Ox EZ Light Custom Plug-In Tow Bar Wiring Kit item # BLU79FR will only work if you disable the Parksense feature while you're flat towing your Jeep. You'll need to reference your owner's manual for how to disable it.

Reply

Answer 1

Hey James, welcome back! The only plug and play wiring harness I have for flat towing is the Curt Custom Tail Light Wiring Kit for Towed Vehicles item #C96JR. This has a 4-way connector that plugs into your motorhome. This plug and play harness…

view full answer...

Answer 2

Hey Wes. The Curt Auxiliary LED Indicator Lights item #C53201 is 1" tall. It measures 7" long and is about 1/4" thick. It comes with a 72" long main wiring harness that attaches to a 4-way connector. The wiring connected to each…

view full answer...

Answer 3

Hey Kelly, in order to have wiring for when your 2021 Jeep Wrangler is being flat towed and also when towing a trailer you would need to install two separate kits as unfortunately either of those can't be used as the other "in reverse".…

view full answer...

Answer 4

The Peterson Magnetic Tow Lights #PE26UR is an acceptable solution if your tail lights are blocked as these lights provide stop, left/right turn signals, as well hazard functionality; additionally, these lights are approximately 6.9 inches tall.…

view full answer...

Answer 5

Yes, we have the Curt tow bar wiring kit part #C96JR that is a confirmed fit for your 24 Wrangler. This installs by plugging inline with your taillight connectors which means it does not need any splicing.

view full answer...

Answer 6

Hey Dellos, the Blue Ox base plate and tow bars are in my opinion the easiest to use and are also very well made so I would recommend the Blue Ox part #BX1139 with the tow bar part #BX7420. Then for lighting the Curt kit part #C96JR is a very simple…

view full answer...

Answer 7

Hey Teo, we have a solution for you but we don't have any harnesses that work as both a tow bar lighting kit and a trailer wiring kit. So what you'd want is the Curt part #C96JR for the tow bar lighting and then for the trailer wiring…

view full answer...

Answer 8

Yes, it will! You'll want to cut off the 4-way connector of the Curt Custom Tail Light Wiring Kit for Towed Vehicles item #C96JR and install the 6-way connector that comes with the Curt Tow Bar 7-Way to 6-Way Coiled Adapter Cord w/ 6-Way Socket…

view full answer...

Answer 9

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 10

Alex, pairing is required to get full functionality. The Bullseye monitor needs to be manually paired with your Shadow 2 brake system #RVI94FR during setup. It doesn’t arrive pre-paired, so you’ll want to leave the breakaway cable unplugged during…

view full answer...

Answer 11

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...