Looking For Extang Tonneau Cover For 2023 Ram 2500 With RamBox

Question

Question:

Looking for a extant cover that will fit my 2023 ram 2500 with the tool box I need a cover replacement

asked by: Michael J

0

Expert Reply:

Hello Michael, thanks for reaching out. It sounds like you are looking for an Extang Tonneau cover for your 2023 Ram 2500 with the RamBox. If so, we do have options for this. Take a look at the following:

- Extang Trifecta 2.0 Soft Tonneau Cover - Folding - Vinyl # EX92426

- Extang E-Series Soft Tonneau Cover - Folding - Vinyl # EX87UV

- Extang Trifecta Signature 2.0 Soft Tonneau Cover - Folding - Canvas # EX94426

All of these are custom fitted for the 2023 Ram 2500 with Rambox bed. Personally, I recommend the Extang Trifecta 2.0 # EX92426. It's a solid, easy-to-use soft folding cover that installs in minutes with no drilling required. It’s built with a sturdy aluminum frame, heavy-duty vinyl, and tight weather seals, so it holds up well and keeps your gear dry. Plus, it’s low-profile and clean-looking, making it one of the best no-fuss covers out there for everyday use.

expert reply by: Jesse M

0

EX92426
(click to enlarge)

Michael I.

11/20/2025

Hello I am looking for the replacement too for mine Bear clawed thru it I have the soft roll up one now

Jesse M.

11/20/2025

@MichaelI So the replacement tarps are brand and model specific. I would need to know exactly which tonneau you have now. The best way to confirm fit is with the serial number and date code.

Answer 1

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 5

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 6

Hey Kelvin, welcome back. To flat tow a 2026 Ford Maverick with your Demco Commander II Tow Bar item #DM9511012, I recommend the following parts: Baseplate Kit - Demco Tabless Base Plate Kit item #DM38CV Wiring Harness - Roadmaster Diode 7-Wire to…

view full answer...

Answer 7

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 8

Hey, Michael! Thanks for reaching out. Yes, we do carry a front mount hitch for your 2025 Ram 2500 diesel. The EcoHitch Hidden Front Mount #EH37FR will fit both diesel and non-diesel models, but it will not fit the Power Wagon models. There’s no…

view full answer...

Answer 9

Hey Tom, congrats on the new truck! Typically when we hear that someone has the OEM tow prep package they mean the puck system. This is going to be five circular holes built into the bed of your Ram truck and is by far the best way to attach a 5th…

view full answer...

Answer 10

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Answer 11

Hey Dave! The ReCurve R3 uses a standard WDH shank so I recommend the Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 10" Rise/6" Drop #EQ90-02-4900. This has a 6" drop and is designed to fit a 2-1/2" receiver. What kind of…

view full answer...

Answer 12

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Looking For Extang Tonneau Cover For 2023 Ram 2500 With RamBox

Products Featured in This Question

Continue Researching