Will the 6,000 lbs Dexter Nev-R-Adjust Electric Trailer Brakes Work on a 5,200 lbs Axle?
Updated 10/26/2025 | Published 10/25/2025
Products Featured in This Question
Question:
Hi, I have 5200 LB axles on my 5th wheel with the Dexter never adjust electric brakes. Will the 23-458-459 brake assemblies work on the 5200 LB axles?
asked by: Thomas H
Expert Reply:
They sure will Thomas. The Dexter Nev-R-Adjust Electric Trailer Brakes - 12" - Left/Right Hand Assemblies item # 23-458-459 are exactly what you need for your 5,200 lbs axles. These 12" x 2" drum brakes will bolt directly to your Grand Design's 5 bolt brake mounting flange. This set comes with both left and right brake assemblies.
If the hardware on your current brakes is the original set, I recommend replacing them when you swap out the brakes. You'll need the Mounting Bolts and Hardware for 12" Brake Assemblies item # BRKH12. This will replace one axles worth of hardware. They'll need to be torqued to 30-50 ft-lbs.
Did you have an issue with your brakes or are you doing routine maintenance?
You can add this information and any other questions you have where it says Reply to Jerred H and I'll be happy to answer them.
(click to enlarge)
Product Page this Question was Asked From
Dexter Nev-R-Adjust Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 6K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 12 x 2 Inch Drum
- 6000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- Dexter
more information >
Continue Researching
- Search Results: wheel seals
- Shop: Trailer Wheel Bearing Kit, LM67048/25580 Bearings, LM67010/25520, GS-2125DL Seal
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 6K
- Shop: Trailer Wheel Bearing Kit, LM67048/25580 Bearings, 25580/25520, 10-36 Seal
- Shop: Mounting Bolts and Hardware for 12" Brake Assemblies
- Shop: Grease Seal GS-2125DL - Double Lip - I.D. 2.125" / O.D. 3.376" - 5.2K to 7K Axles - Qty 1
- Shop: Timken 412920 Grease and Oil Seal - I.D. 2.250" / O.D. 3.376" for 5.2K, 6K, and 7K Axles
- Shop: Grease Seal 10-36 - Double Lip - I.D. 2.250" / O.D. 3.376" for 5.2K-7K Axles - Qty 1
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Search Results: trailer hitch
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Shop: Trailer Wiring
- Article: Most Popular Wheel Bearings
- Search Results: trailer tires and wheels
- Video: Review of etrailer Trailer Bearings Races Seals Caps - Bearing Kit - BK3-300
- Shop: Suspension Enhancement
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Search Results: trailer jack
- Shop: Brake Controller
- Search Results: trailer leaf springs
- Video: Setting up the etrailer Electric Trailer Brakes on a 2017 Grand Design Reflection Fifth Wheel
- Video: Review of etrailer Trailer Bearings Races Seals Caps - Bearing Kit - BK3-310
- Search Results: trailer brakes
- Search Results: trailer hubs and drums
- Shop: Vehicle Tow Bar Wiring
- Q&A: How to Initially Adjust the Dexter Nev-R-Adjust Electric Trailer Brakes
- Q&A: Correct Bearing Kit for a 7,000 lbs Dexter Axle
- Q&A: Comparing Dexter and etrailer.com 7,000 Pound Electric Brake Assemblies
- Q&A: Will 6k Brake Assemblies fit 5,200 lb Trailer Axle
- Q&A: Initial Adjustment Of Nev-R-Adjust Electric Brakes
Thomas H.
10/26/2025
Thanks Jerrod, I'm just doing routine maintenance. I will order the hardware kits as you recommended.. I also need two wheel seals. I ordered a wheel bearing kit from you early last year when I serviced the hubs. The invoice shows 10-36 wheel seals. The previous seal also had a number of GS-2125DL. What seals do I need?