Will the B&W Turnoverball Hitch Work w/ the Fender Liners on a 2022 Ram 2500?

Question

Question:

Does the BandW goose neck hitch BWGNRK1320 work on a 2022 Ram 2500 with the wheel well fender liners? It looks like the handle to pull pin will be behind the fender liner on driver side.

asked by: Mike H

0

Expert Reply:

Hey Mike. If by work with you mean you'll have to cut an access hole, then yes it will! The entire 5th page of the instructions for the B&W Turnoverball Underbed Gooseneck Trailer Hitch item # BWGNRK1320 details the exact steps you'll need to get the handle installed and through your fender liner.

The B&W Turnoverball Underbed Gooseneck Trailer Hitch item # BWGNRK1320 has been confirmed to fit the 2022 Ram 2500. This hitch is custom fit and includes all hardware necessary to complete installation on your truck.

I have linked the installation instructions along with a video we made so you can see how to get this gooseneck hitch setup.

If you do not want to cut through your fender liner we also have the Curt Custom Underbed OEM-Style Gooseneck Trailer Hitch item # C60633. The release mechanism is built into the hitch ball itself.

What kind of trailer do you have?

You can add this information and any other questions you have where it says Reply to Jerred H and I'll be happy to answer them.

To make towing with a gooseneck easier, I recommend adding the Curt 5th Wheel/Gooseneck Custom Wiring Harness item # C56000. This harness puts a 7-way connector in the bed of your truck and allows you to keep the one on your bumper. This makes hooking up to your gooseneck trailer easier and more convenient.

expert reply by: Jerred H

0

B&W Turnoverball
(click to enlarge)

Jerred H.

11/13/2025

Hey Mike, how did things go with the B&W Turnoverball hitch on your Ram 2500 and the fender liners? Did cutting the access hole for the handle work out as shown in the instructions? Your update could make it easier for others setting up the same hitch.

Answer 1

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 9

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 10

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 11

Hi Fred! The Firestone Ride-Rite Air Bags w/ Easy Mount Compressor - Wireless Control - Single Path - 5,000 lbs #F24XV will indeed fit your 2025 Ram 2500 with the factory puck system. The only vehicles it won't fit are ones that have the factory…

view full answer...

Answer 12

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Will the B&W Turnoverball Hitch Work w/ the Fender Liners on a 2022 Ram 2500?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching