Replacement Grease Cap and Grease Seal for a Dexter 3,500 lbs Hub & Drum Assembly
Updated 11/16/2025 | Published 10/17/2025
Products Featured in This Question
Question:
I am looking for a rear grease seal and grease cap with black rubber cap for a dexter 10inch drum. 3.5k lbs axle. 5x4.5 bolt pattern is the drum. Thank you
asked by: Prestyn
Expert Reply:
Hey Prestyn, thanks for the information. Since you have a 3,500 lbs Dexter Hub like item # 84546UC3-EZ, you'll need the 2" Lubed Dust Cap & Rubber Plug item # DC200L-DCRP and for the grease seal item # 58846. Both of these parts are sold individually.
What kind of trailer do you have?
You can add this information and any other questions you have where it says Reply to Jerred H and I'll be happy to answer them.
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.72 Inch I.D.
- 2.57 Inch O.D.
- etrailer
more information >
Continue Researching
- Q&A: Replacement for Dexter Grease Seal 010-019-00
- Q&A: Replacement Grease Seals For TRP GS-1719DL
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Recommended Grease Seals For Dexter 9919860 3,500lb Axles
- Article: Most Popular Wheel Bearings
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Q&A: What is the Difference Between the Dexter 010-036-00 and the Timken TMK98ZR Grease Seals?
- Article: Hydraulic Trailer Brakes: How They Work & What to Buy
- Q&A: Replacement Bearings and Seals for Lippert 4,400 Lb Axle
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Q&A: Replacement Seal Recommendation for Dexter 010-004-00
Jerred H.
11/13/2025
Hey Prestyn, did the grease seal and dust cap Jerred suggested fit your Dexter 3,500-lb axle setup? Your update could make it easier for others working with the same hub and drum.