Will the Easy Grease Trailer Idler Hub Assembly AKIHUB-545-2-EZ-2K Work w/ 13" Wheels?
Updated 11/13/2025 | Published 10/16/2025 >
Products Featured in This Question
Question:
Does this hub assembly accommodate 13” wheels?
asked by: Greg
0
Expert Reply:
No, it does not Greg but I have one that does. For 13" wheels you'll need the Easy Grease Trailer Idler Hub for 2K Axles item # AKIHUB-545-2-LFEZ-2K. This is also a pre-greased idler hub with 5 on 4-1/2 lug nut pattern that has item # L44649 inner and outer bearings. It has a 2,000 lbs capacity and is sold individually.
The item # AKIHUB-545-2-EZ-2K you were looking at only works with 10" to 12" wheels.
What kind of trailer do you have?
expert reply by:
Jerred H
0
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 2K Axles - 10" to 12"- 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- EZ Lube
- Pre-Greased
- L44649 / L44649
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: Availability Of Replacement Hub For Dico 45263
- Q&A: Can A Load Range G Tire Be Installed On The Lionshead Aluminum Siberian Trailer Wheel LH78MR?
- Q&A: Recommended Pre-Greased Hub To Replace DICO 45623 Hub On Shoreland'r Boat Trailer
- Q&A: Recommended Idler Hub Kit w/a 5 on 4-1/2" Lug Nut Pattern for 2,200 lbs Axles
- Q&A: Correct Replacement Idler Hub for Triton 2 Place Snowmobile Trailer
- Q&A: Replacement Bearing Solution for DICO Hub 45263
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: How Much Does a Boat and Trailer Weigh?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)



Jerred H.
11/13/2025
Hey Greg, how did the Easy Grease hub for 13" wheels work out on your trailer? Your results could help others trying to match the right hub size for their setup.