Looking For New Hubs For Snowmobile Trailer
Updated 09/12/2025 | Published 08/18/2025
Question:
I have a snowmobile trailer that needs new hubs. Id like to buy some that are ready to install. The trailer rating is 3500lbs axle is 1.062 diameter straight. 5x4.5 lug nuts What do you recommend or have to sell to do this job? Thank you
asked by: Richard B
Expert Reply:
Hello Richard, thanks for reaching out. We do offer 5 on 4-1/2" hubs for a 1-1/16" straight spindle. Take a look at the following:
- Easy Grease Trailer Idler Hub Assembly for 2K Axles - 10" to 12"- 5 on 4-1/2 - Pre-Greased # AKIHUB-545-2-EZ-2K
This uses the # L44649 (1.063" inner diameter) inner and outer bearing. The seal is 1.5" ID. It comes pre-greased ready to install. It will work with wheels between 10" and 12" in diameter.
What size wheels does your trailer use?
(click to enlarge)
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 2K Axles - 10" to 12"- 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- EZ Lube
- Pre-Greased
- L44649 / L44649
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Continue Researching
- Search Results: cotter pin
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 10" to 12"- 5 on 4-1/2 - Pre-Greased
- Search Results: trailer tires and wheels
- Video: Review of etrailer Trailer Hubs and Drums - Pre Greased Idler Hub - AKIHUB-545-2-EZ-2K
- Q&A: Correct Replacement Idler Hub for Triton 2 Place Snowmobile Trailer
- Shop: Kenda 205/65-10 Bias Trailer Tire with 10" White Wheel - 5 on 4-1/2 - Load Range E
- Shop: Kenda 215/60-8 Bias Trailer Tire with 8" White Wheel - 5 on 4-1/2 - Load Range D
- Q&A: Determining The Correct Replacement Hubs For A 2008 Triton Travel Trailer
- Shop: Bauer Products T-Handle Lock for Truck Caps - Counterclockwise - Gloss Black
- Shop: Kenda 205/65-10 Bias Trailer Tire with 10" White Wheel - 4 on 4 - Load Range B
- Shop: Kenda 215/60-8 Bias Trailer Tire with 8" Galvanized Wheel - 5 on 4-1/2 - Load Range D
- Shop: Kenda 205/65-10 Bias Trailer Tire with 10" White Wheel - 4 on 4 - Load Range D
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Search Results: snowmobile trailer hub
- Q&A: Replacement Galvanized Hub for a 2000 Floe Pro 1 Plus Single Axle Snowmobile Trailer
- Q&A: Replacement Hubs for 1997 FLOE Pro 100 Plus Snowmobile Trailer
- Q&A: Correct Replacement Idler Hub for Yacht Club Aluminum Clam Shell Snowmobile Trailer
- Q&A: Replacement Hub for a Karavan Single Jet Ski Trailer w/ a 5 on 4 1/2 Lug Pattern and 13" Wheels
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Search Results: trailer hitch
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Suspension Enhancement
- Video: Measuring To Choose The Right Trailer Axle
- Search Results: trailer jack
- Article: How to Measure for Trailer Hitch Drop
- Shop: Brake Controller
- Search Results: trailer wiring
on Trailer Hubs and Drums
Jesse M.
9/12/2025
Hey Richard, did you have a chance to check the wheel size on your trailer? I'm here to help if you're still looking for a solution.