Is Replacement MaxxFan Plus 4-Speed Roof Vent Available With Smoke Lid

Question

Question:

Maxxair MA00-04751KSX - is this available with a smoked lid?

asked by: Chris F

0

Expert Reply:

Hi Chris; I'm sorry to say the Replacement MaxxFan Plus 4-Speed Roof Vent # MA00-04751KSX is only available with the white lid. You would have to swap out the lid with # MA10A40009K. Is your old lid still in good shape? You could swap it over to the replacement vent if it is.

expert reply by: Robin H

0

Replacement MaxxFan Plus 4-Speed Roof Vent
(click to enlarge)

Robin H.

10/30/2025

Hey Chris, did you end up swapping the smoked lid onto the MaxxFan Plus roof vent? Knowing how that fit worked out could help others looking to do the same thing.

Answer 1

Hey Amy. To replace your Maxxfan motherboard 10A21275KZ you'll want the Replacement Printed Circuit Board item #MA10A21275K. The only exception would be if your fan is the MaxxFan Plus 4-Speed Roof Vent item #MA00-04751KSX in which case…

view full answer...

Answer 2

Yes, the MaxxAir MaxxFan Plus Roof Vent #MA00-04751KSX that you referenced would easily replace the MaxxFan you currently have installed in your 2015 Montana 36RL as this fits the same size RV roof opening.

view full answer...

Answer 3

Knowing the actual model number would be best so as to confirm you are ordering the correct part but, if you have the the MA00-04751KSX then we have the Replacement Printed Circuit Board for MaxxAir Powered Lift RV Roof Vents, #MA39FR.

view full answer...

Answer 4

Hey James, thanks for all of the info you listed. Based on that the correct replacement circuit board is the part #MA10A04751KS.

view full answer...

Answer 5

Hello Jeff, It sounds like your MaxxAir AirExcel 4-speed roof fan #MA00-04751KSX is having a bit of trouble with the lid only opening about an inch, even though the fan itself works on all speeds. Since it does open when you manually crank it, that’s…

view full answer...

Answer 6

Since multiple MaxxAir Fans have the same features that you listed it's honestly best to first determine the exact model number you have before purchasing anything and end up not having it be compatible. I've listed below all the available…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Is Replacement MaxxFan Plus 4-Speed Roof Vent Available With Smoke Lid

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching