How Long is the P&F Products Nosing Edge Trim for Enclosed Trailers PF28FR?

Question

Question:

how long is this trim

asked by: Tom

0

Expert Reply:

Hey Tom. The P&F Products Nosing Edge Trim for Enclosed Trailers item # PF28FR measures 93-1/2" long.

What kind of trailer do you have?

expert reply by: Jerred H

0

Jerred H.

9/29/2025

Hey Tom, did the 93-1/2 inch length of the trim work for your trailer? I'm curious to know because it could help others looking to fit their trailers with similar trim.

Tom

9/30/2025

@JerredH Yes trim worked very well.

Jerred H.

10/1/2025

@Tom Glad it worked out well for you. Let me know if you have any additional questions.

Answer 1

Hey Tom. The Replacement Footplate Keeper Pin for etrailer and Ram Square, Direct Weld Jacks item #TJD-7000-PN has a 9/16" diameter. It's exactly what you need for the 5/8" holes on the Replacement Drop Leg for etrailer and Ram Square…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 10

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 11

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 12

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

How Long is the P&F Products Nosing Edge Trim for Enclosed Trailers PF28FR?

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching