What 5th Wheel Hitch can Use with My Draw-Tite/Reese 5th Wheel Rails?

Question

Question:

I am looking for hitch options to fire draw tire rails. Could you sell me models available that will fit these rails? Thanks

asked by: Dave B

0

Expert Reply:

Hello Dave,

My mother always told me to never assume, but since she isn’t here right now, I’m going to assume you mean the Draw-Tite/Reese 5th wheel rails. The great news is that Reese rails use the industry standard pattern, so there are a lot of hitches that will fit them.

The Reese 5th Wheel Trailer Hitch - Dual Jaw - 16,000 lbs # RP30047 you were looking at is a solid choice. If you’d like to invest a little more, my personal favorite is the B&W Patriot 5th Wheel Trailer Hitch - Dual Jaw - 18,000 lbs # BWRVK3255. B&W hitches are made in the USA, backed by incredible customer service, and built to last, a true win-win.

If your truck has a 6 3/4' bed, I recommend going with a sliding hitch to ensure you have enough clearance for tight turns.

What bed size is your truck, and how much does your camper weigh? That way we can make sure you get the best fit.

expert reply by: Kate F

0

Kate F.

9/29/2025

Hey Dave, did you have a chance to check the bed size of your truck and the weight of your camper? I'm asking because I want to make sure you get the best hitch fit for your setup.

Dave B.

9/29/2025

@KateF It’s a 6 1/2’ bed Silverado. My old hitch was a Draw tight 16k LB double jaw. I was able to back into it without locking it open First. My 5th wheel was only 26’ and the only issue I ever had with that one was trying to pull out at a 90 degree angle uphill. The camper rubbed the bed. I was blocked in and only had one way to go. I don’t have the camper yet, but it will be another small one. Especially since the new ones have slides. More than enough room for us and they are lightweight and pull very easy.

Kate F.

9/29/2025

@DaveB What is nice about the new campers too is that they are making it to where the noses are more tapered, so you have more clearance for turning as well. Yes, the new campers with the slides are super nice! Awesome how roomy they are. Thanks for responding Dave! Hope you are able to get a camper soon so you can get on the road to adventure.

Answer 1

It is possible to pull a 5th wheel with a Chevy Colorado. There are going to be a few limiting factors though, this vehicle really is not designed for 5th wheel or gooseneck towing. I recommend using a Universal install kit like the Reese #RP30035,…

view full answer...

Answer 2

Hello David, Since the Chevy Colorado does not have the towing capacity of a full-sized truck, there are no custom base rail kits made for it. Custom rails are usually preferred because they come with brackets that line up with existing frame holes,…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 7

Hey David, the Derale transmission cooler part #D15200 that you referenced does not come with a thermostat or any install kit components but if you wanted a similar option that does have all of that you would want the part #D15500.

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

Hey John, thanks for the picture of your truck bed! To install a set of 5th wheel rails in your 2022 Ram 2500, I recommend the B&W Custom Installation Kit w/ Base Rails item #BWRVK2602. This set of rails are industry standard so they'll work…

view full answer...

Answer 10

Hey Hadiya! No, the Curt E16 5th Wheel Hitch w/ S20 Slider for Ram #C85PV will not give you enough clearance to maneuver the Layton Skyline 5th wheel with your 2021 Ram 1500 with a 5-1/2' bed. This unit only moves you 12" back from the…

view full answer...

Answer 11

Hey Adam, we have just what you are looking for with the B and W fifth wheel rail kit part #BWRVK2402 which is a confirmed fit for your 2017 Ford F-250 and is the industry standard rail design which means it will fit the hitch you have. This is a…

view full answer...

Answer 12

Louie, Yes, that is a great question. You do not have to worry about the air bags interfering with your B&W Turnoverball hitch setup. The Firestone Ride-Rite Air Bags with Easy Mount Compressor and In-Cab Control #F84XV are compatible with in-bed…

view full answer...

What 5th Wheel Hitch can Use with My Draw-Tite/Reese 5th Wheel Rails?

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching