Will The Curt Hitch C11354 Fit A 2013 Volkswagen Beetle TDI?
Updated 09/29/2025 | Published 09/12/2025 >
Products Featured in This Question
Question:
I have been reading review in various locations and I need a simple confirmation... I have a 2013 VW Beetle TDI. Will this hitch work with that vehicle? Also, do you provide a 1 1/4inch to 2inch adapter? Thanks in advance.
asked by: Andy T
Expert Reply:
Hi Andy!
The Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11354 will indeed fit your 2013 VW Beetle TDI. It actually fits everything but the R models, so you are good to go!
As to the 1-1/4" to 2" adapter, we have a few options for you. The first is the TowSmart Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver # TS52FR, which is a straight adapter. The other would be the etrailer Hitch Adapter - 1-1/4" to 2" Hitch - 4-1/2" Drop/5" Rise - 6-1/2" L # e93YR, which you would use in the rise position. However, we haven't had the chance to install the hitch on a Beetle yet, so I am not sure how far underneath the bumper the pin hole is. This has 3" from the center of the pin hole to the closest edge of the 2" receiver (see 2nd picture), and I am not sure if it will work or not. You will need to take a measurement after the hitch is installed to see if this can be used or not. The flat one will definitely work though. One thing to note about either of these, and any adapter like this, is they do cut your tongue weight in half. So with this hitch having 150 pounds of tongue weight capacity, using an adapter will cut that down to 75 pounds of useable tongue weight.
These kinds of adapter can also cause a bit of movement, so I always recommend getting an anti-rattle device with them. There are a lot of options available for this, but I prefer the Roadmaster Quiet Hitch options. They are a simple design, but sometimes simple is best. For the 1-1/4" side, you would want the # RM-061-125 and for the 2" side, you will want the # RM-061. These will work with either of the adapter I mentioned as well.
Guessing you will using this with a bike rack?
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- For Towing
- Class I
- 150 lbs TW
- 1500 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Trailer Hitch
- Search Results: torque wrench
- Search Results: tools
- Video: 2024 Honda CR-V etrailer Trailer Hitch Receiver: Complete Installation
- Video: How to Install the etrailer Class III Trailer Hitch - 2025 Honda CR-V
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Trailer Wiring
- Video: Hands-On with the Roadmaster Quiet Hitch for 1-1/4" Trailer Hitches
- Video: How to Install the Curt Class III Trailer Hitch - 2025 Honda CR-V
- Shop: BTBRV Magnetic Hitch Receiver Reducer Sleeve - 2-1/2" to 2" - Red
- Shop: Replacement 2" Adapter for Swagman 1-1/4" to 2" Bike Racks
- Shop: Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver
- Shop: Roadmaster Quiet Hitch for 1-1/4" Trailer Hitches
- Shop: Trailer Hitch Receiver Adapter 1-1/4" to 2" Hitch - 6-1/2" Long
- Video: Curt Custom Fit Vehicle Wiring - Trailer Hitch Wiring - C56380 Review
- Q&A: Differences Between Curt Hitches C11260 And C11354 For A 2013 VW Beetle
- Video: Best 2016 Volkswagen Beetle Hitch Options
- Article: Trailer Wiring Diagrams
- Search Results: trailer hitch
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer wiring
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: trailer tires and wheels
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Suspension Enhancement
- Search Results: trailer hitch ball mount




Lazer S.
9/29/2025
Hi Andy, Did you have a chance to measure the pin hole after installing the hitch on your Beetle? I'm curious if the adapter worked out for you, especially since it could help others with similar setups.